stihl 066 porting

[Canadian farm boy]

That's a nice looking saw junkman. Me likey

 

[junkman]

definite bonus points for the full wrap 1/10 of a point deduction for the plastic top cover badge unless you ordered if from me and then it is awesome

was a metal tag saw but the letters were all gone ,could not find a new metal one ,just plastic

 

[Definitive Dave]

Bryce on Ebay has some repops they are having made, some don't have the mounting holes pre-drilled and some have a little bit of "not quite right" about the font.
I looked into dye sub onto aluminum substrate myself but seems like a lot of work to duplicate what they are already doing.

 

[jmssaws]

I haven't ever seen a oem full wrap.

 

[huskihl]

I've seen a tuna wrap

 

[Deets066]

 

[huskihl]

View attachment 4101

Das a tree quarter wrap

 

[Definitive Dave]

7\8 wrap
If you can get the clutch cover on an off easy and tension the Bar nuts without a three point hitch but it isn't symmetrical to the flywheel side it is a 7/8 wrap
661 dogs are the tie breaker

 

[Deets066]

Added some fingers to mine tonight

 

[huskihl]

Added some fingers to mine tonight
View attachment 4102

You get a 288 piston for that rig? I'm guessing the way it ran before, if you flip it you'll hook the exhaust port

 

[Deets066]

You get a 288 piston for that rig? I'm guessing the way it ran before, if you flip it you'll hook the exhaust port

Nope, new style KS piston. The pins are close to the exhaust but it should be fine. I didn't go super wide when I did the exhaust

 

[Deets066]

288 piston is in my other rig.

 

[Deets066]

288 piston is in my other rig.

If I ever get it back

 

[DexterDay]

Chit..

That works better than *s-word..

Nice saws BTW!

 

[Mastermind]

First full wrap I've ever seen. They must be rare as hell.

 

[drf256]

Added some fingers to mine tonight
View attachment 4102

Beautiful grinding there Deets.

 

[Deets066]

Beautiful grinding there Deets.

First set of fingers I've tried. Wasn't as bad as I thought they would be. I do like the aluma hog for roughing them in and gettin through the plateing

 

[Deets066]

Beautiful grinding there Deets.

Not quite as purdy as yours but they will have to work!

 

[drf256]

I think they're nicer.

 

[Mastermind]

First set of fingers I've tried. Wasn't as bad as I thought they would be. I do like the aluma hog for roughing them in and gettin through the plateing

Dulls the heck out of em though.