Solo 665 thread

[Deets066]

How's the bigger carb install coming?

Backwards


You can stretch the impulse and slip it over the fitting on the carb.

But it will tear a hole right through it after a few seconds.

Intake ring needs to be changed or throttle cable modified.

Also plan to try am make a 90 * v-stack so I can get an air filter to work

 

[stihl livin]

Paging deeter

 

[Deets066]

Paging deeter

Parts ordered

 

[Miller Mod Saws]

Parts ordered

Ya don't need parts. Just use duct tape and expanda-foam. That fixes everything.

 

[Deets066]

Ya don't need parts. Just use duct tape and expanda-foam. That fixes everything.

Duct tape would make a good base gasket!

 

[stihl livin]

Deetsy must be slacking as this has hit page 3.

 

[mdavlee]

Husky parts are slow sometimes.

 

[Deets066]

Deetsy must be slacking as this has hit page 3.

 

[stihl livin]

Do you always piss rev a saw that close to your crotch?

 

[Deets066]

Do you always piss rev a saw that close to your crotch?

Gives me a rush

 

[Deets066]

Put the carb on and just couldn't get it to fire, pop, nothing.

Turns out carb won't push fuel when you get the fuel and impulse hoses mixed up

 

[Dub11]

Put the carb on and just couldn't get it to fire, pop, nothing.

Turns out carb won't push fuel when you get the fuel and impulse hoses mixed up

I blame everyone else when I do something like this

 

[big t double]

How much longer till the crankshaft falls apart. I keep waiting and watching for that video.

 

[concretegrazer]

How much longer till the crankshaft falls apart. I keep waiting and watching for that video.

 

[Deets066]

How much longer till the crankshaft falls apart. I keep waiting and watching for that video.

I ain't scared

 

[Deets066]

Ok, so I thought the timing was a little far before, but didn't sound too bad. I can hear it more with the new carb on

 

[Deets066]

 

[stihl livin]

What did you do for a filter with the big carb?

 

[Deets066]

What did you do for a filter with the big carb?

Nothing yet, need to fab up a custom 90 degree vstack

 

[mdavlee]

Air filters are over rated. Matt's 7900 probably hasn't had one in 2 years