So what did you buy today

[davidwyby]

The Husky mower parts I ordered showed up today. I'm lovin' the new "order straight from us" feature Husqvarna is offering. @davidwyby where did you get the tuning screwdrivers from? I need to get a set of those as well. I'm stocking up on saw repair stuff, I just got a Mityvac so I can pressure and vacuum test saws and specialty tuning drivers are next on the list.

How long do they usually take for shipping in stock items?

Thanks

 

[Woodslasher]

How long do they usually take for shipping in stock items?

Thanks

I got the parts in 3 or 4 business days, I believe. I ordered them on Sunday or Monday and got them on Thursday or Friday.

 

[Allanb8d]

Got some spacers for my 620 to run Stihl bars. Oiler lines up nicely. Can't wait to run it.

 

[davidwyby]

I think sleazer the Plant Brain approves. @Egg Shooter definitely does.

 

[motoOzarks]

Bought a MiniMac 25 from some people cleaning out their relatives house.
While I was there I got a Skil model 944
Don't know why........just did
here is a guy tearing it up with a 944

 

[Egg Shooter]

I think sleazer the Plant Brain approves. @Egg Shooter definitely does. View attachment 294997

Don't drag me into another oil thread mr. Lol.

I ran it at 32:1 - 36:1.

 

[Egg Shooter]

Bought a MiniMac 25 from some people cleaning out their relatives house.
While I was there I got a Skil model 944
Don't know why........just did
here is a guy tearing it up with a 944

View attachment 295006 View attachment 295007

I had the Husqvarna version of that skill.

 

[chipper1]

Put a new clutch in the skidding winch a few weeks ago, I was real busy at that time and didn't get any pic up.
It's been needing it for yrs so it was good to take care of that. I used it on a job on a river bank and figured it justified reinvesting a bit of that cash.
Still need to try it out, maybe this week, we'll see.

 

[SpaceBus]

Had to buy a new Type A spinner anvil for the Tecomec spinner I got just a few weeks ago. Can't find the original type A since I swapped it for the B. Still have the type A handle, but not really helpful by itself. Also going to have to call Agri Supply tomorrow morning. Discovered that my stump grinder PTO shaft is bent, probably happened a little over a month or so ago when my tractor got mired in the mud.

 

[motoOzarks]

I had the Husqvarna version of that skill.

What model would that be?
It was a rain day today so I introduced myself to the 944 on the bench. Man this thing is light.
Couldn't get spark and as I was fumbling around checking the switch(plastic piece inside is broken) noticed the spark plug wire was pulled out of coil. It was getting dark so I stopped and will have the use a bolt or something to push in there as my spark tester was not long enough to reach. So I don't know if it's bad coil or pulled out wire.
What is the likely hood of fixing this? Can I remove the rubber cover and get in there and solder or crimp or something?
What's the word in finding a new coil if I need one?

 

[motoOzarks]

bought a nice starting and looking echo cs520
haven't tried it out yet

 

[Egg Shooter]

What model would that be?
It was a rain day today so I introduced myself to the 944 on the bench. Man this thing is light.
Couldn't get spark and as I was fumbling around checking the switch(plastic piece inside is broken) noticed the spark plug wire was pulled out of coil. It was getting dark so I stopped and will have the use a bolt or something to push in there as my spark tester was not long enough to reach. So I don't know if it's bad coil or pulled out wire.
What is the likely hood of fixing this? Can I remove the rubber cover and get in there and solder or crimp or something?
What's the word in finding a new coil if I need one?
View attachment 295182

Model 35. They were made in Canada. Pioneer made them I think.

 

[Egg Shooter]

Nope, Electrolux made the 35

http://acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/7daec64b55fdc97d88256b5200145b98

 

[Egg Shooter]

Many coil wires screw into the coil. The coil has a metal screw inside that hole. The ones ive seen that don't are glued in.

 

[Egg Shooter]

My bad. The 35 was a bit larger than your Skil. Physical size that is, not engine.
This is the husqvarna version. Skil made them for Husqvarna according to the page below.

http://www.acresinternet.com/cscc.n...af8e5684f69da57588256b52001439df?OpenDocument

 

[SpaceBus]

Put a new clutch in the skidding winch a few weeks ago, I was real busy at that time and didn't get any pic up.
It's been needing it for yrs so it was good to take care of that. I used it on a job on a river bank and figured it justified reinvesting a bit of that cash.
Still need to try it out, maybe this week, we'll see.
View attachment 295064 View attachment 295065

I wish my Fransgard V3507 had two kick stands instead of the one.

 

[SpaceBus]

I found the Type A anvil for my spinner today, only to discover that the bag of what I assume to be pre-sets and tie straps ended up being only pre-sets. The PTO shaft has been ordered and might get here next week. Unfortunately they didn't have any economy shafts left, so it was $290 shipped for a Euro Cardan PTO shaft.

 

[Woodslasher]

I bought 25 feet of "husky-size" fuel line so I'll be able to put new fuel lines in stuff without having to make a 1.5 hour trip into town.

 

[Allanb8d]

Got an adapter to run Stihl bars with my 7900 from @Homelite410. Excellent product and service. Oh, got a new 7900 too! Just fire it up for the first time today. I am going through an old school carb saw phase. Trying to snap some up while they are available.

 

[deye223]

Got an adapter to run Stihl bars with my 7900 from @Homelite410. Excellent product and service. Oh, got a new 7900 too! Just fire it up for the first time today. I am going through an old school carb saw phase. Trying to snap some up while they are available.

View attachment 295539

Is that the HD filter kit as well