So what did you buy today

[Allanb8d]

Nice!!!
Is the tensioner screw directly in the way of the wrap like on the huskies???

Not at all. Pretty good clearance, very well designed.

 

[kneedeepinsaws]

I had a full wrap 372 and it’s right in the way. Bar nuts are in the way too so a wrench is easier to use. Bought a 562 wrapped and thought the new design would eliminate that, nope...
I’m just griping but sometimes the little things are nice

 

[deye223]

I have a Stihl 460R I just trimmed up the scrench to fit if I remember I'll get a picture tomorrow

 

[Allanb8d]

I had a full wrap 372 and it’s right in the way. Bar nuts are in the way too so a wrench is easier to use. Bought a 562 wrapped and thought the new design would eliminate that, nope...
I’m just griping but sometimes the little things are nice

I agree, especially when you are frustrated, the convenient features really make a difference.

 

[CrystalRiver1]

Couple of extra loud Hawaiian shirts, shorts, sunglasses, and some sandals for a trip to San Diego, visiting my son, his wife, and my grandkiddo's.
I grind extra hard, giving, sowing, loving, counseling, referring, advocating for broken humanity....NOW IT"S ME TIME!
They live exactly 2 minutes from the beach!!

 

[kneedeepinsaws]

Well I put on the full wrap tonight and I stand corrected here... the chain adjuster for the 562 wrap is fully accessible. Only one of the rear bar nuts is partially obstructed which isn’t really a problem at all with the husky scrench.
So the new model did improve over the old... sorry for the misinformation!!!

 

[chipper1]

I have no doubt I will completely screw it up when the time comes.
But I'm goin for it anyway.........

They still cut nice when sharpened like you would normally sharpen them, so if you can do that, all will be fine, just not quite as fast as new or as smooth.
You will go thru files though.

I spent $80 or so yesterday at the hardware store, got a 24"x48" piece of 3/8 plywood, a box of 100 carriage bolts, box of 100 nuts, couple plumbing fittings, tub of plumbers buddy, 2 cutting-off wheels for the 4' grinder.
The chicken run is getting closer to being done(more than the picture) and the new to me kitchen sink/faucet is as well.

Before.After.

 

[chipper1]

Hey all, I'm new to the forum. Just picked up this CS 620-PW as a truck saw. What started out as a 2 saw plan has gotten out of control.

View attachment 294086

Congrats on the new saw!
What saw you buying next .

 

[Allanb8d]

Congrats on the new saw!
What saw you buying next .

Hehehe, that obvious huh. You got me, I'm eyeing a ms 661 with wrap handle.

I already got a limbing saw, felling saw, and all around truck saw. Could complete the set with a big felling/ occasional milling saw.

Here are my other saws.

 

[stretch5881]

I just received one of Mike's chainvises. Very well made. We'll see if I can better myself at filing. Thanks Mike.

 

[chipper1]

I just received one of Mike's chainvises. Very well made. We'll see if I can better myself at filing. Thanks Mike.

Those are great, congrats.

 

[chipper1]

Hehehe, that obvious huh. You got me, I'm eyeing a ms 661 with wrap handle.

I already got a limbing saw, felling saw, and all around truck saw. Could complete the set with a big felling/ occasional milling saw.

Here are my other saws.

View attachment 294464

Just figured .
After you get those you have to get an edc, maybe a little echo 2511 .
Wow, you run the expensive fuel.
I buy these, not sure if I posted it in here, but I just got a new bottle within the last couple weeks.. There isn't much dye in it so it looks a bit red, I don't mind, but I have some stihl dino oil I'll be adding to my next batches for a little more color, I won it at a gtg so I have to use it now lol.

 

[davidwyby]

Couple of extra loud Hawaiian shirts, shorts, sunglasses, and some sandals for a trip to San Diego, visiting my son, his wife, and my grandkiddo's.
I grind extra hard, giving, sowing, loving, counseling, referring, advocating for broken humanity....NOW IT"S ME TIME!
They live exactly 2 minutes from the beach!!

hey das my back yard. Matter of fact will be there morrow trading wife’s accord for outback

n might meet another David for some milling

holler if you want

 

[davidwyby]

Ordered some blue marble 2 cycle oil@Egg Shooter

will be a while before I need enough more oil to try some Dom, haha!

 

[Wilhelm]

I ordered new summer tires for my mom's car, they may come in today.

I also negotiated a truckload of turkey oak logs.

 

[Allanb8d]

Just figured .
After you get those you have to get an edc, maybe a little echo 2511 .
Wow, you run the expensive fuel.
I buy these, not sure if I posted it in here, but I just got a new bottle within the last couple weeks.. There isn't much dye in it so it looks a bit red, I don't mind, but I have some stihl dino oil I'll be adding to my next batches for a little more color, I won it at a gtg so I have to use it now lol.
View attachment 294518

I'm intrigued by those top handles Echo. If I ever get a top handle saw, it will be Echo for sure.

That's some interesting premixed linked.

I usually run the VP 50:1 40:1 stuff. My dealer has them for $17 per gallon. I got the smaller trufuel bottle to reuse. Mainly use the premix because sometimes it could be weeks between cutting time and not alot of good ethanol free gas around me.

 

[davidwyby]

Really looking forward to tomorrow morning

 

[chipper1]

I'm intrigued by those top handles Echo. If I ever get a top handle saw, it will be Echo for sure.

That's some interesting premixed linked.

I usually run the VP 50:1 40:1 stuff. My dealer has them for $17 per gallon. I got the smaller trufuel bottle to reuse. Mainly use the premix because sometimes it could be weeks between cutting time and not alot of good ethanol free gas around me.

They're great little saws for sure. I have a good number of baby saws and small saws including the 2511. I'd like to get the 2511 rear handle, maybe if I come across a great deal on one or pick up a bunch of work this yr. For now the ms193, ms200, and ms201 rear handles will have to cover the small on the ground cutting.

 

[Woodwater]

I have now a degreewheel

 

[Woodslasher]

I bought 'em a week or so ago, but they showed up today. A '97 371 and a '14 365 with a CCP top end, I'm gonna combine them if possible.