Saw video thread

[Deets066]

Bout a 1/4 turn in on the H

 

[Armbru84]

Bout a 1/4 turn in on the H

Ya I was just trying the chain mainly. Went from a 28 to that and didn’t mess with carb. She will get quicker.

 

[ferris]

60" 8-pin .404 full comp.

Can u put that bar on a 880/3120 to compare them with that 125 beast

 

[Chainsaw Jim]

Can u put that bar on a 880/3120 to compare them with that 125 beast

It's a large mount stihl bar that I used an adapter to make fit. I'll be running a brand new stock 880 with the same set up for comparison...though it may not be until the gtg this late spring.

 

[huskyboy]

25.4 secs for mastermind 395 and 39.7 secs for 394 with mild muffler mod. 7 pin on 394 and 8 pin on 395. Same 36” B/C. I wish I had the same sprocket on both, but in theory the 8 pin should take more power to pull it.

 

[RI Chevy]

Nice and strong Mason. [emoji106]

 

[Locust Cutter]

They both look good. That 395 looks like fun!

 

[460 magnum]

 

[huskyboy]

They both look good. That 395 looks like fun!

That 395 is probably one of the strongest saws I’ve run yet, other than uncle lee’s custom 084 piston dolmar 166 and a mastermind 088. That 394 is a good one for pretty much stock.

 

[Chainsaw Jim]

I love the irony of fabz's comment on that video.

 

[drf256]

I love the irony of fabz's comment on that video.

Fabz?

Here’s my 024 with an 026 head and an 044 carb. No load cut through wood.





And you know what this Proves?

Absolutely nothing.

 

[Deets066]

I love the irony of fabz's comment on that video.

How about my comment, hehe

 

[Deets066]

I thought I was gunna see another saw lock up like Snelling had the 64 do to him.

Jeez he holds it open a long time.

 

[Chainsaw Jim]

Fabz?

Here’s my 024 with an 026 head and an 044 carb. No load cut through wood.

View attachment 114119



And you know what this Proves?

Absolutely nothing.

Fabz also left a reply on gerbutt's comment.


And what it proves? Well I'm assuming he's going to keep blowing saws up until he comes to a "professional opinion" that high rpm saws are a gimmick in an attempt to slam his competition. Lol, silly thinking.
I really have no idea why anyone would hold a saw wot that long while having it tuned that lean, while making weightless high rev cuts. You test a work saw by putting it to work, not piss revving it to death. You test a race saw by making cuts until it starts to run hot, not piss rev it to death.

 

[RI Chevy]

I am surprised it started back up and actually idled.

 

[huskyboy]

Do you guys see the rpm he tunes the psycho 395 to? Was something like 15,600. Not trying to bash his work, but there is no way I would tune mine that fast for work all day.

 

[RI Chevy]

Gives new meaning to HOT SAWS.

 

[ChipsFlyin]

1. Disassemble saw.
2. Port saw and replace piston.
3. Reassemble saw.
4. Set camera up.
5. Run saw at the absolute limits that a saw should not be run knowing what was going to happen - internal damage.
6. Review video.
7. Upload video.

To me it looks like a waist of time and money. People can do what they want...

 

[Locust Cutter]

I'm assuming "JB" is Jack, the builder in the video with he handle of Hotsaws101?

 

[460 magnum]

I'm assuming "JB" is Jack, the builder in the video with he handle of Hotsaws101?

yes