Saw video thread

[Locust Cutter]

I'd like to try one, but doubt I'd buy one even if I did like it. Too many other things I need and want right now. But, I do have a 372 to compare it to.

 

[VinceGU05]

Just confirms what I always thought...441s are fuggin overweight dogs.

i am going to try and open up the muffler more and advance the timing and see if that helps.

 

[skip sail]

Was a fun day,thanks Vince.

 

[94BULLITT]

 

[RI Chevy]

Nice. 3/8 or .325?

 

[94BULLITT]

3/8

 

[RI Chevy]

That's what I thought. Cutting too good for .325.

 

[Manofstihl066]

 

[MustangMike]

I'd like to see comparisons of skip to full comp. In hardwoods, I prefer full comp. I also like a 7 pin rim, and would rather drop the rakers a bit instead of going to a larger pin. (I realize others have different opinions).

IMO, a slower chain creates less wasted friction, and less derails.

 

[Moparmyway]

I'd like to see comparisons of skip to full comp. In hardwoods, I prefer full comp. I also like a 7 pin rim, and would rather drop the rakers a bit instead of going to a larger pin. (I realize others have different opinions).

IMO, a slower chain creates less wasted friction, and less derails.

But dropping the rakers is harder on the cutters

 

[MustangMike]

But dropping the rakers is harder on the cutters

That is why I run Stihl chain!!!

 

[Manofstihl066]

I’ve got some full comp rs I could square up to compare.

 

[Moparmyway]

That is why I run Stihl chain!!!

Even Stihl chain gets hammered Mike ............ nails or rocks will kill just about anything

 

[RI Chevy]

Quick question here. Is this Stihl chain .050 or .063?
The box says 33RS3 72. 20" 72DL .050.
When I measure it is shows .063. Could be why I could only make 2 cuts with my .050 bar. WTF!!!!

 

[Moparmyway]

Its got a 3 on the drivers ............. thats 0.050

 

[Manofstihl066]

Quick question here. Is this Stihl chain .050 or .063?
The box says 33RS3 72. 20" 72DL .050.
When I measure it is shows .063. Could be why I could only make 2 cuts with my .050 bar. WTF!!!!

Jeff, is that the chain u threw?

 

[RI Chevy]

Yes

 

[Manofstihl066]

Yes

Drivers could be burred, causing it to stick.

 

[RI Chevy]

Its got a 3 on the drivers ............. thats 0.050

Thanks Kevin

 

[RI Chevy]

Drivers could be burred, causing it to stick.

I gotta go over it good then.