Saw video thread

[Duane(Pa)]

 

[Vintage Engine Repairs]

I'd love to run a ported Aussi 660. This is stock 25" bar 3/8 chain and in some of this dry harder wood it's fairly underwhelming. It gets the job done, but you certainly can't dog in without it bogging down.

 

[JohnnyBlade]

Husqvarna 36. Here's one i put new bearings and seals in. Muff mod. New oil pump, air filter and some smalls. Buddy wants a lil limbing saw for around the farm and I had just the saw for him. Runs great and 4 stroking good at 13,200. No need to go any higher. Good power at that rpm. About a 9" hard as a rock dead red oak limb for testing. Semi chisel 3/8" lp. 14" bar.

Russ's Husqvarna 36

This is "Russ's Husqvarna 36" by Nick Accetturo on Vimeo, the home for high quality videos and the people who love them.

vimeo.com

 

[jacktheripper]

 

[jacktheripper]

Ok, here’s another. MOFO 034 Super vs my self-ported 266xp without any machine work. Same bar and chain and same wood.

 

[huskihl]

 

[heimannm]

Play all 3 videos at once and imagine you're at a GTG.

Mark

 

[cuinrearview]

If you catch his avatar just with the corner of your eye, it kinda looks like...

 

[lehman live edge slab]

If you catch his avatar just with the corner of your eye, it kinda looks like...View attachment 466802

That’s not very nice

 

[huskihl]

If you catch his avatar just with the corner of your eye, it kinda looks like...View attachment 466802