Saw video thread

[RI Chevy]

Sounded strong. You might be able to pull a 9 pin. Lol
Held RPMs really well in the cut.

 

[huskyboy]

Having idle issues. Seems like the linkage.

Doc is that the 50 or 52 mm bore?

 

[drf256]

52

 

[Dub11]

Nice video from Finnland about the Stihl 500i

I wanna see a long bar big wood video.

 

[TreeLife]

I wanna see a long bar big wood video.

We all do. We all wanna see what it's made of, but them there euro guys like short bars

 

[Leafy]

I guess the euro guys just don't mind bending over.

 

[RI Chevy]

I heard that no one over the pond over there has any big wood. LMFAO. [emoji23]

 

[drf256]

China 440 in 24ish inch wood. The log got thicker the more I cut.

Boring videos. The Vstack did little to nothing for the saw vs. the airfilter setup.

I pushed last cut, it was faster. I need lower rakers.

 

[paragonbuilder]

Saw looks great Doc! No peaky hybrid there.

 

[Lightning Performance]

Liked it at 14. Take a tiny bit off the back of that straw tube might help loaded down. Gear it up first before touching that chain. Nice job on chasing down the fuel curve! A grumpy runner for sure.

 

[drf256]

Testing video. Long and annoying

First cut was 32" semi chisel 404 with a 7 pin.

 

[Wolverine]

View this content on Instagram

View this content on Instagram

I have no details as it’s not my vid. Thought it sounded nasty!

 

[T.Roller]

Testing video. Long and annoying

First cut was 32" semi chisel 404 with a 7 pin.

That saw sounds like it's getting hot Doc

 

[huskyboy]

Just sounds to me like the carb isn’t supplying enough fuel on the L circuit unless the linkage is messed up like he said earlier.

 

[T.Roller]

Just sounds to me like the carb isn’t supplying enough fuel on the L circuit unless the linkage is messed up like he said earlier.

I'd say it's getting hot which is why ithe leaning out after every cut. Having to tune the high everytime to get it back down.

 

[huskyboy]

I'd say it's getting hot which is why ithe leaning out after every cut. Having to tune the high everytime to get it back down.

He’ll have to comment on that, I’m interested in his response.

 

[drf256]

I'd say it's getting hot which is why ithe leaning out after every cut. Having to tune the high everytime to get it back down.

Nope.

Retuned to test. Held rpm after cut.

But heat played a roll in the L setting for sure.

 

[T.Roller]

Nope.

Retuned to test. Held rpm after cut.

But heat played a roll in the L setting for sure.

Yes sir

 

[Canadian farm boy]

This is one of my all time favorites. I've wanted one for myself for a long time. I finally ported it and got it pieced back together.

Stihl 034 super. Tilly carb running a 7 pin with 3/8 chain on a 20" bar.

 

[paragonbuilder]

This is one of my all time favorites. I've wanted one for myself for a long time. I finally ported it and got it pieced back together.

Stihl 034 super. Tilly carb running a 7 pin with 3/8 chain on a 20" bar.

Nice Mike!