Saw video thread

[huskyboy]

Don't remember if I posted this or not but check out the pile of chips pouring out of the clutch cover . Don't tell me it don't have a load on it. Tried a lo top for a while and it flows better than the hi tops and gains. Put the hi top back on eventually as the lo tops don't filter worth a *s-word. Tuned to about 13,400 in the video.

 

[Wolverine]

@Wolverine is this before or after switching to 8 pin

That I'm unsure of. It wanted to stay right around 10,8-11,3. Great runnin' still.

 

[T.Roller]

That I'm unsure of. It wanted to stay right around 10,8-11,3. Great runnin' still.

It ran about the same with the 8 pin. Bad mfer

 

[Wolverine]

Definitely. DW should have vid of a DD357 and an EC357 in that same wood. I'll time them when he posts, see how they stack up.

 

[Duane(Pa)]

Definitely. DW should have vid of a DD357 and an EC357 in that same wood. I'll time them when he posts, see how they stack up.

I'll check what I have tonight...

 

[Wolverine]

@Duane(Pa) won the chain war. We need to run the same b/c and do it again

And Shawns old edition 346.

 

[Wolverine]

@dall timed some cuts... the old edition 346, which is 45cc smoked the mofo 036 which is how many cc?

@Hot Husky 365 The oak log really made that saw shine.
EDIT: Me and someone else thought that was oak. The chip sure looked and smelled like it, not 100% sure about that though.

3rd cut I leaned on it a bit. Boy is that saw/chain combo sweet DW!!!!!

 

[dall]

 

[Duane(Pa)]

@dall timed some cuts... the old edition 346, which is 45cc smoked the mofo 036 which is how many cc?

@Hot Husky 365 The oak log really made that saw shine.

3rd cut I leaned on it a bit. Boy is that saw/chain combo sweet DW!!!!!

Right! Cut more firewood than I care to load in about 5 minutes.

 

[dall]

@Wolverine we will run them again soon

 

[RI Chevy]

I would have liked to turn up the wick a little on my MOFO 026 to run in that same piece of wood. Just for comparison. [emoji106]

Sent from my SM-G930V using Tapatalk

 

[Duane(Pa)]

@Wolverine we will run them again soon

I have a few more to add to the mix. It will be a festival!

 

[Wolverine]

@Wolverine we will run them again soon

That's what I like to hear!! I look forward to it. Not a whole lot I like better than runnin' saws with you guys.

 

[Wolverine]

I have a few more to add to the mix. It will be a festival!

I better get busy w/ the alaskan!

 

[Ricardo Bolio]

JAJAJAJAJAJ NICE VIDEOS. CONGRATS.

 

[Dolmar Junkie]

JAJAJAJAJAJ NICE VIDEOS. CONGRATS.

Ricardo, Welcome to the forum! Don't know where Merida is, will have to Google it but it sounds like somewhere with Beach's and Beautiful Women! If I'm wrong don't tell me for a little while, it's a pretty picture in my head... Matt

 

[paragonbuilder]

I would have liked to turn up the wick a little on my MOFO 026 to run in that same piece of wood. Just for comparison. [emoji106]

Sent from my SM-G930V using Tapatalk

It beat a mofo 036 Jeff...


Sent from my iPhone using Tapatalk

 

[Wolverine]

It beat a mofo 036 Jeff...

 

[RI Chevy]

I know. I saw that.
I wanted to do it for COMPARISON purposes. Just to see where the 026 was at.

Sent from my SM-G930V using Tapatalk

 

[drf256]

It beat a mofo 036 Jeff...


Sent from my iPhone using Tapatalk

In what size wood with what bar?

Not saying I build the best saw, but saying a Corvette beat a Peterbuilt in a quarter mile ain't comparing apples to apples.

You'll see a cant saw from me soon.