Saw video thread

[Chainsaw Jim]

@Chainsaw Jim in some of your vids the chips go over the fence into neighbor yard LOL

I know it appears that way in the video but they actually don't make it over. I check all the time. I stand in an awkward spot eating chips when I'm reaching over the top.

 

[jmssaws]

Jason should start selling them for people to make into pellets.
Same for Chainsaw Jim. Lol

What will you give for a load?

 

[RI Chevy]

Lol. I have no idea. But you only cut good hard wood so the chips are primo.
Gotta be better than some of the pellets in bags out there.

 

[Chainsaw Jim]

Doug Fir sawdust is very valuable around here for making fire starters. The professional firewooders mix the chips with hot wax and stuff it into dixie cups with a little wax paper fuse sticking out the top. They sell cases of these things to their customers at a couple bucks each.

 

[RI Chevy]

I use to buy them. They work great.

 

[jmssaws]

When I start pushing at the end of the cut the clutch gives up.
You can hear it,broke a spur and all the springs

 

[t4driller]

Hope this link works. It's a 346 I ported with 359 intake tract. Running a 20 inch 3/8 icepick square chain in hard locust.

 

[Backtroller]

Looks good. Sounds like a really nice combination.

 

[MustangMike]

Very impressive!

 

[t4driller]

Looks good. Sounds like a really nice combination.

It pulls it pretty good. It's going to wear a 18 or 16 full time though. I wanted to see how it would do with the 20 inch.

Sent from my SM-G930V using Tapatalk

 

[RI Chevy]

Nice. Do you have any other saws similar in size for a comparison?

 

[huskihl]

Nice. Do you have any other saws similar in size for a comparison?

An 044 is close....

 

[t4driller]

Nice. Do you have any other saws similar in size for a comparison?

Only thing I have close is a ported husky 350. My other saws are bigger. Stihl 361, 440/460 hybrid, 066 all ported

Sent from my SM-G930V using Tapatalk

 

[RI Chevy]

Ahh. Ok

 

[mdavlee]

An 044 is close....

It might keep up with that hooskie

 

[huskyboy]

Now this is the 372 I remember. Played around with this 372 some more. Got a new grind on 372 chain. Made a huge difference. Not that far behind ported 394, this was in same log. 20" 8 pin dead oak. 044 look out.

 

[RI Chevy]

Nice Mason.
Your cutting style looks very, very familiar. Lol

 

[huskyboy]

Nice Mason.
Your cutting style looks very, very familiar. Lol

I try to show the saw self feeding and with a hard load. I was pushing pretty good with last cut.

 

[RI Chevy]

Yes you were.

 

[Definitive Dave]

Stihl vs Husqvarna: the primal conflict - it doesn't get any closer than this