Saw video thread

[jmssaws]

441. I think it will be a 442. Looks a lot like a 362 version 2 but 70cc.

No fooling the 362 gen11 is very awesome saw.
I need to weigh them but I think it's lighter than a 5105 dolmar. No joke

 

[jmssaws]

I hope it is a 442.

 

[mdavlee]

No fooling the 362 gen11 is very awesome saw.
I need to weigh them but I think it's lighter than a 5105 dolmar. No joke

I hope it's back to a 14 lb 71cc powerhead.

 

[X 66 stang347 X]

With a 4 barrel carb and dual exhaust

 

[RI Chevy]

Maybe a Walbro double pumper. Lol

 

[mdavlee]

Maybe a Walbro double pumper. Lol

Tilly HL

 

[RI Chevy]

Maybe even Fuel Injection.

 

[X 66 stang347 X]

Really it could have the fuel injection like the demo saws. Wasn't it the first moronic?

 

[Chainsaw Jim]

My neighbor hit me up for some charger plates for an upcoming wedding. The longer logs I have are really dry and stickery so I had no choice but to use these shorter pieces of cured red alder. I used the opportunity to check out Dave's 2051 with an 8 tooth sprocket and off the roll .325 chain.

And yes...I caught a whiff of something really bad about half way through.

 

[MustangMike]

I think it is a 462, there was a pic of it in the new calendar (I think my wife threw it away). Rummer is a 73 cc saw that is less than 14 lbs. The pic was not a M-Tronic saw.

 

[jmssaws]

I think it is a 462, there was a pic of it in the new calendar (I think my wife threw it away). Rummer is a 73 cc saw that is less than 14 lbs. The pic was not a M-Tronic saw.

I would have thought that all the new pro saws would be mtronic.
This little guy is

 

[MustangMike]

I would have thought so too Jason, but Stihl recently re introduced non M-Tronic versions of the 261 & 362, so I don't know what is going on. The saw in the calendar had adjustment holes.

 

[huskyboy]

I think husky both offered 576xp with and without autotune for a while as well. Wonder why Stihl would do that too.

 

[paragonbuilder]

I would have thought that all the new pro saws would be mtronic.
This little guy is View attachment 62454

Have you messed with it yet?


Sent from my iPhone using Tapatalk

 

[jmssaws]

Have you messed with it yet?


Sent from my iPhone using Tapatalk

I started to the other day then realized that I don't have a bar that will fit it.
I got one on the way

 

[drf256]

I pulled the Mofo MS260 down from the shelf to try a nice fast picco chain with 9 pin sprocket.
I might have been faster with an 8 (or even 7) but this is like cutting butter, no chatter at all.
Smoothest cut I may have ever felt.

After a few cuts I wanted to see if there was a little more in the tank so i bumped the high just a tiny smidgeon, it sounded good to me at the time, but it may have slowed the saw down a little.

Looks like ya need less sprocket davey

 

[mdavlee]

I think it is a 462, there was a pic of it in the new calendar (I think my wife threw it away). Rummer is a 73 cc saw that is less than 14 lbs. The pic was not a M-Tronic saw.

That's right. The Canadian calendar has a 462 picture in it. I had 442 on the brain for some reason

 

[ferris]

Here in Germany the 462 will be Released in the end of the year.

 

[Manofstihl066]

I started to the other day then realized that I don't have a bar that will fit it.
I got one on the way

Great looking saw! I hear a lot of guys say they'd much rather have the older 200t because of the power difference. Did stihl get the kinks worked out with the new model? Im sure after ported it wouldn't be an issue.

 

[Deets066]

Just a little piss rev, need to play with it yet