Saw video thread

[Chainsaw Jim]

Here's a 2051 I just finished up with. First cuts running rich. It'll go up quite a bit more. I'm very impressed with its torque.

 

[jmssaws]

Wood is concrete hard

 

[tree monkey]

 

[tree monkey]

want to guess the saw?

 

[Time's Standing Stihl]

want to guess the saw?

I'm guessing it's your 026? Can't be a hoosky, at that rpm all the bolts would start flying out

 

[tree monkey]

no, my 026 turns just over that. next

 

[Onan18]

want to guess the saw?

2153

 

[Wolverine]

I'm guessing it's your 026? Can't be a hoosky, at that rpm all the bolts would start flying out

Hey.. wait just a cotton pickin' minute...


I ain't got nothin fallin' off my Husky. Bring it!!!!

 

[Redbull661]

new 461, 1st tank. ported by @tree monkey

28" bar, 8 pin sprocket , 3/8ths RS full comp ...chain is just ok, not great.

edit - tuned pretty fat, at 13500. (stock limited coil)

wood is maple. and im not sure exactly.

 

[Mastermind]

That video reminded me of that one time I got drunk and screwed a chainsaw.

 

[Wolverine]

That video reminded me of that one time I got drunk and screwed a chainsaw.

 

[tree monkey]

new 461, 1st tank. ported by @tree monkey

28" bar, 8 pin sprocket , 3/8ths RS full comp ...chain is just ok, not great. tuned at 13500

wood is maple. and im not sure exactly.

your girlfriend is.............well............dog ugly

 

[tree monkey]

2153

close

 

[tree monkey]

 

[Deets066]

want to guess the saw?

One that's runnin a tad lean

 

[Deets066]

new 461, 1st tank. ported by @tree monkey

28" bar, 8 pin sprocket , 3/8ths RS full comp ...chain is just ok, not great. tuned at 13500

wood is maple. and im not sure exactly.

Still the stock coil?

 

[Chainsaw Jim]

One of these days I'll get a small spline drum so I can run smaller than a 9 tooth sprocket with the 20" bar. Lol
Still not so bad I guess. Apparently that aggressive ass chain makes chunky stew out of those chips.

 

[RI Chevy]

What were you running for chain Jim? 3/8lp?
And what type of muffler mod did you do?
Runs nice.

 

[Chainsaw Jim]

.325 square chisel. I added a second deflector with screen on the flywheel side.
I need to order a mesh screen filter for it. It's still running the most restrictive version.

 

[drf256]

My 024S with a 44mm 026 jug ground tree monkey style and an 044 carb.