You’re some kinda philosophizer lol I like it
I was running a pop up like I typically do on 62s... Went back to a band cut and a little higher exhaust. I'm not positive what I did on blowdown. Id have to check my notes. I believe it was more.
I think the chips were just moving too fast for that camera to see well.
Gary that runs very nicely. Looks like a great powerband
It was shoveling the chips, believe me. Like @Nutball said, they were just moving too fast to see em. Chain was nice and sharp. The saw definitely cuts faster with the 8pin, the wood was seasoned (dry) white oak and was really hard. At the end of the video I was cutting across a crotch with several “hearts” . 4 actually. And the saw did the same thing my other saw with an 8 pin did (066). It stops self feeding at times and acts as if the chain is just sliding over the wood. Won’t really bite into it and makes dust fir a second or two. Probably has something to do with chain speed, With a long bar the saw would benefit from the extra torque the 7 pin would provide but it runs great with the 25” bar and the 8 pin. It’s staying.
Holding the Rpm like a mad man!
Do all of those 562s have port covers on the outside of the cylinder?
