Saw video thread

[jacob j.]

He was pretty excited to run his new saw today

Gotcha - it seems like you got it running pretty well.

I have cut with it a little bit. I really like it in small timber that I can sweep . If I can't sweep it with that .325 i can't get it to stay in the same kerf wants to double cut for me. But if I am cutting small stuff with the 9 tooth sprocket and .325 it is super fast. You have to be careful about not sawing them off lol

Is the chassis holding enough oil for you and staying flexible throughout the day? It would only last about 3-3.5 hours for me and then get gummed up so badly that it would slow chain speed in the cut.

We were thinning on a big sale up Shively creek and the wood was really dry - it was an east/southeast facing slope.

 

[HYPERSAWS]

Gotcha - it seems like you got it running pretty well.



Is the chassis holding enough oil for you and staying flexible throughout the day? It would only last about 3-3.5 hours for me and then get gummed up so badly that it would slow chain speed in the cut.

We were thinning on a big sale up Shively creek and the wood was really dry - it was an east/southeast facing slope.

Ya it will do just fine in the smaller stuff, but once I get into that dry bigger stuff no I do not like it on the stump at all to dry

 

[WillG]

Sent from my E6910 using Tapatalk

 

[rogue60]

270 Canadien vs ms280c
Nah not really just a test and tune.
I've got a way better chain for the 270 Canadien it's got chity .404 skip chain in this vid I have a full comp .404 square filed chain for it to try next.
Both saw's running on 25:1 mix of the good stuff! no chity synthetic here! lol...

 

[RI Chevy]

Cool. 2 saws. 2 different power bands

 

[sawnami]

Had a friend wanting a large garden step so I cut him off a cookie with the 750.

Sent from my SM-T900 using Tapatalk

 

[Bigmac]

Had a friend wanting a large garden step so I cut him off a cookie with the 750.

Sent from my SM-T900 using Tapatalk

Love the way a 750 makes a neat pile of chips!

 

[srcarr52]

Experimenting with an AM 395 carb. It took a bit of work but it runs well.

 

[WillG]

357 is ALIVE! Just need to sort out a couple minor things, toss a bar and chain on, do some tuning then head to the wood pile!

Sent from my E6910 using Tapatalk

 

[Brewz]

My 661
36” bar
idle was a bit off as I just fitted a new maxflow setup and wanted to see if it would dial its self in without a calibration

 

[Brewz]

Running in a race ported 372
It’s just running off the roll husky xcut 3/8 in very hard Aussie grey gum firewood logs
Holds 11500 to 12000 in the cut

 

[Brewz]

Race ported stihl 046.
325 9 tooth.
This saw will 4 stroke up to around 15800
Tuned here to about 15000 rpm
Cutting grey box. One of Australia’s top few Hardest hardwoods.
I’m calling it will run a 10 tooth in softer race wood

 

[TreeLife]

Nice to see ya posting @Brewz ! Those saws are all looking and sounding very healthy

 

[Fruecrue]

Who’s the new guy?

 

[RI Chevy]

Not sure, but I had to turn my phone upside down to watch the fast saw vids. Lol
Very nice Tony!!!
Another trio of nice White Knuckle Saws...

 

[TreeLife]

Not sure, but I had to turn my phone upside down to watch the fast saw vids. Lol
Very nice Tony!!!
Another trio of nice White Knuckle Saws...

The fella from down under!

 

[RI Chevy]

LOL. Yes...
Tony builds some real nice strong saws...

 

[Fruecrue]

LOL. Yes...
Tony builds some real nice strong saws...

While we sleep mate.

 

[RI Chevy]

Yes..he builds while we are sleeping... lol

 

[MustangMike]

Ah … Correction … Tony builds some real nice STIHLS!!!!