Saw builds

[Iron.and.bark]

I'm pretty sure he meant max torque lands at a particular rpm on each saw. Each saw that rpm is different.


Sent from my iPhone using Tapatalk

Yep, I was more talking about there is an additional factor in the equation (and that 5252 make not be the exact correct figure I admit, to long out of education system)

 

[paragonbuilder]

Yep, I was more talking about there is an additional factor in the equation (and that 5252 make not be the exact correct figure I admit, to long out of education system)

Gotcha. [emoji106]


Sent from my iPhone using Tapatalk

 

[malk315]

What's nice about that 064 is you are doing maximum work (best HP) anywhere between 7000 and 11500. Keep it anywhere near 10 or 11000 while cutting and you are smiling. I guess if you can keep it more towards 11000 you cut fastest since chain is going faster and you haven't lost any power.

The hell with all of that though... I just like how loud that saw is and the Klotz Benol smell... With some of that... I'm good.

 

[Iron.and.bark]

As I said a lot off assumptions in calc, but good fun

Saws are geared any reff to HP/torque/rpm as a statement to performancd, has to take both the transmission of power and mechanical losses inherent into consideration.

Will have an engine torque and a sprocket torque. Same with rpm..

But a good saw is a good saw

 

[malk315]

Yeah that 064 is "a good saw is a good saw".

 

[jmssaws]

Were making power by porting but the main thing is were moving that power up in the rpm which turns the chain faster and that's what it's about to me.

 

[jmssaws]

Yeah that 064 is "a good saw is a good saw".

That saw is my favorite.

 

[Time's Standing Stihl]

In that last video, looks like it's getting leaned on pretty hard w the spikes, must have some torque [emoji6]

 

[junkman]

I have a hard time seeing good sawlogs that could be made into lumber made into cookies these days .What do you guys do with all the cookies ?

 

[malk315]

I have a hard time seeing good sawlogs that could be made into lumber made into cookies these days .What do you guys do with all the cookies ?

Sent from my XT1080 using Tapatalk

 

[jmssaws]

I have a hard time seeing good sawlogs that could be made into lumber made into cookies these days .What do you guys do with all the cookies ?

That's why I use pine most of the time, I have several pine groves and there worth nothing here so I cut them up instead of oak

 

[Definitive Dave]

I have a hard time seeing good sawlogs that could be made into lumber made into cookies these days .What do you guys do with all the cookies ?

load em in the dump trailer and pay to dump them
logger gets paid to cut em and mill gets paid to cant em, I pay for em and haul em to my house to shrink them into little pieces and then have to pay to dump them, I think each of my cants feeds a family for a week in the end

 

[malk315]

Dans @paragonbuilder outdoor furnace alias cookiemonster.

Sent from my XT1080 using Tapatalk

 

[junkman]

That's why I use pine most of the time, I have several pine groves and there worth nothing here so I cut them up instead of oak

I like knotty pine ,i would be milling that up and making stuff out of it

 

[paragonbuilder]

I like knotty pine ,i would be milling that up and making stuff out of it

I need to get me a mill...


Sent from my iPhone using Tapatalk

 

[junkman]

I need to get me a mill...


Sent from my iPhone using Tapatalk

The norwood chainsaw mill i got from northern tool is about 1k ,has more than paid for itself ,you do lose about 1 board per log or so due to the kerf size of a chainsaw though
Some cedar fence boards i did on it


A doug fir 16 foot beam i was cutting for my front porch roof

 

[jmssaws]

We have a woodmizer but I need most of the wood to test saws in.
Port 3 saws a week and put a tank through each takes a bunch of wood.
I'm lucky to have anything to cut generally.

 

[jmssaws]

My 064 got here so I had to see if the 066 was faster,the 064 is off,airleak or something because it won't go past 13700 and the 066 is at 14200. 066 puts a whoopin on it too. I'll fix the 064 and have a rematch.

 

[paragonbuilder]

The norwood chainsaw mill i got from northern tool is about 1k ,has more than paid for itself ,you do lose about 1 board per log or so due to the kerf size of a chainsaw though
Some cedar fence boards i did on it
View attachment 27307 View attachment 27309

A doug fir 16 foot beam i was cutting for my front porch roof
View attachment 27310

How long does it take to mill a beam like that?


Sent from my iPhone using Tapatalk

 

[Time's Standing Stihl]

I use all my cookies. Stuff from the cants get thrown in the fire pit and I smoke with all my oak cookies. Works pretty slick with charcoal

Sent from my SM-G900R4 using Tapatalk