High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

Not So Pro 3

sawmikaze

Mastermind Approved!
Local time
7:26 PM
User ID
625
Joined
Jan 20, 2016
Messages
9,592
Reaction score
52,058
Location
steeltown
I'd be lying if I said I wasn't intrigued by the power and speed that electric vehicles can achieve. Beyond that, meh. Technology has to be better than what it replaces, not just equally as good with different tradeoffs.

Let's think critically about this for a minute.

People will start buying electric vehicles when electric vehicles are cheaper to buy than gas vehicles, have more range than gas vehicles, can tow more and go faster than gas vehicles, and can charge to 100% in under an hour at any gas station for less money than filling a tank of gas.

Currently, compared to gasoline vehicles, electric cars are more expensive, have less or equal range, tow less or equal, are generally slower, take hours to charge and the charging network is scarce.

There are no advantages. Why should they expect people to buy them?

Correct me if I'm wrong..

But isn't the sheetz on 30 by hempfield one of the only places around here to charge ?
 

redline4

I'm huge in Japan
Local time
6:26 PM
User ID
5593
Joined
Mar 12, 2018
Messages
13,271
Reaction score
112,242
Location
Rosholt Wisconsin
Country flag
This is serious fellas..

I'm 99% sure I got a text message from a guy last night that pimps his wife out or is some kind of swinger/sex trafficker and he sent it to the wrong number by accident..I didn't know if I should laugh or be a little concerned..I'm 99% sure I should be a little concerned..

What should I do ?

Probably start by asking if she's a homeowner or pro model and give them Dallas' number.
 

nbbt

Mastermind Approved!
GoldMember
Local time
6:26 PM
User ID
12238
Joined
Apr 13, 2020
Messages
3,879
Reaction score
26,015
Location
5543X, 5644X
This is serious fellas..

I'm 99% sure I got a text message from a guy last night that pimps his wife out or is some kind of swinger/sex trafficker and he sent it to the wrong number by accident..I didn't know if I should laugh or be a little concerned..I'm 99% sure I should be a little concerned..

What should I do ?
Don't click on the picture, they have found a way to add spy ware installs into them when clicked on!
 

sawmikaze

Mastermind Approved!
Local time
7:26 PM
User ID
625
Joined
Jan 20, 2016
Messages
9,592
Reaction score
52,058
Location
steeltown
Don't click on the picture, they have found a way to add spy ware installs into them when clicked on!

Roger that.

It's an open picture that you can see without clicking on it.

It's not some weird link with a message "Bob" from India sent.
 
Last edited:

cuinrearview

Handy dood
Local time
7:26 PM
User ID
9248
Joined
Apr 16, 2019
Messages
11,166
Reaction score
77,590
Location
Dowling, MI
Country flag
Morning fellas. Doing a little screwing around in the yard today and this hammer donkey needs some advice. The service pole closest to the house was finally replaced the week before last. They removed the old mercury vapor light but refused to install it on the new pole. It's fine, it wasn't working anyway. I picked up a new LED to replace it but I want to know what I should use to cover the wire up the pole. It just looks like romex but it has a covering that was probably rated to be buried in the 50s when gramps put it in. I am not going to replace it, I just want to know what to use to replace the old wood half circle covering that protected it on the old pole. PVC pipe? Tube socks? Hollowed out dent pullers?
 

redline4

I'm huge in Japan
Local time
6:26 PM
User ID
5593
Joined
Mar 12, 2018
Messages
13,271
Reaction score
112,242
Location
Rosholt Wisconsin
Country flag
Morning fellas. Doing a little screwing around in the yard today and this hammer donkey needs some advice. The service pole closest to the house was finally replaced the week before last. They removed the old mercury vapor light but refused to install it on the new pole. It's fine, it wasn't working anyway. I picked up a new LED to replace it but I want to know what I should use to cover the wire up the pole. It just looks like romex but it has a covering that was probably rated to be buried in the 50s when gramps put it in. I am not going to replace it, I just want to know what to use to replace the old wood half circle covering that protected it on the old pole. PVC pipe? Tube socks? Hollowed out dent pullers?


Used bratwurst casings.
The all natural ones.
 

Dream

Mastermind Approved!
Local time
7:26 PM
User ID
7152
Joined
Aug 27, 2018
Messages
8,403
Reaction score
45,776
Location
Elberton, GA
Country flag
Morning fellas. Doing a little screwing around in the yard today and this hammer donkey needs some advice. The service pole closest to the house was finally replaced the week before last. They removed the old mercury vapor light but refused to install it on the new pole. It's fine, it wasn't working anyway. I picked up a new LED to replace it but I want to know what I should use to cover the wire up the pole. It just looks like romex but it has a covering that was probably rated to be buried in the 50s when gramps put it in. I am not going to replace it, I just want to know what to use to replace the old wood half circle covering that protected it on the old pole. PVC pipe? Tube socks? Hollowed out dent pullers?
Use the grey pc. Its rated electrical conduit. You can use IMC or rigid too, but thats a little spendy and harder to work with. Has to be bent, threaded, etc.
 

GCJenks204

"Special Buns"
Local time
6:26 PM
User ID
367
Joined
Dec 31, 2015
Messages
15,499
Reaction score
98,556
Location
Winnipeg, MB
Country flag
This is serious fellas..

I'm 99% sure I got a text message from a guy last night that pimps his wife out or is some kind of swinger/sex trafficker and he sent it to the wrong number by accident..I didn't know if I should laugh or be a little concerned..I'm 99% sure I should be a little concerned..

What should I do ?
Concern for your safety or her’s?

Yourself, you know ou can handle yourself, why not try it out?

Her? Up here we have cybertip.ca that has resources to help individuals that are being trafficked. Not sure what exists down there but they do share and work internationally so there may be some info there for you too.
 

sawmikaze

Mastermind Approved!
Local time
7:26 PM
User ID
625
Joined
Jan 20, 2016
Messages
9,592
Reaction score
52,058
Location
steeltown
Concern for your safety or her’s?

Yourself, you know ou can handle yourself, why not try it out?

Her? Up here we have cybertip.ca that has resources to help individuals that are being trafficked. Not sure what exists down there but they do share and work internationally so there may be some info there for you too.

Hers..I don't worry for me ..at all..lol.

I hope this girl isn't in some kind of trouble.
 

Lnk

Stock Chainsaws do not suck!
Local time
7:26 PM
User ID
19702
Joined
Oct 12, 2021
Messages
6,978
Reaction score
39,659
Location
East, TN
Country flag
Morning fellas. Doing a little screwing around in the yard today and this hammer donkey needs some advice. The service pole closest to the house was finally replaced the week before last. They removed the old mercury vapor light but refused to install it on the new pole. It's fine, it wasn't working anyway. I picked up a new LED to replace it but I want to know what I should use to cover the wire up the pole. It just looks like romex but it has a covering that was probably rated to be buried in the 50s when gramps put it in. I am not going to replace it, I just want to know what to use to replace the old wood half circle covering that protected it on the old pole. PVC pipe? Tube socks? Hollowed out dent pullers?
Look up wiremold!
 
Top