Not So Pro 3

[timg]

Working on a wrecker machine today guys. What a fuggin mess, hot, dusty, and alot of crash banging going down. I gave myself a GFY for the day.

 

[Mastermind]

If it's different I'm talkin an 1/8 of an inch at best.

An 1/8" would be enough to cause it not to catch.

 

[Mastermind]

Built a gate. Not a slacker.

 

[markds2]

Working on a wrecker machine today guys. What a fuggin mess, hot, dusty, and alot of crash banging going down. I gave myself a GFY for the day. View attachment 420375View attachment 420376View attachment 420377

What's wrong with the machine Tim?

 

[Bilge Rat]

Built a gate. Not a slacker.

View attachment 420378View attachment 420379

Looks like you are erecting yet another obstacle in your path to the workshop.
Just one more step along the path to slackmanship.

I like the well executed design.

 

[Gullet]

Working on a couple of poulan clamshells to sell (pp220 & 2600 farmhand).
Bluetooth.
Brings back some memories...

 

[Loony661]

No tornadoes today, so that’s good.

 

[sawmikaze]

An 1/8" would be enough to cause it not to catch.

Touche'

If that's the case how the hell would an 1/8 of an inch break off of the arm ?

 

[Lnk]

Touche'

If that's the case how the hell would an 1/8 of an inch break off of the arm ?

Friction? Maybe just wore down enough over time.

 

[Mastermind]

Touche'

If that's the case how the hell would an 1/8 of an inch break off of the arm ?

Probably wore off over time

 

[Mastermind]

Friction? Maybe just wore down enough over time.

Probably wore off over time

Grate mines

 

[John Wargo]

Built a gate. Not a slacker.

View attachment 420378View attachment 420379

Wanna stop by the school and teach a class Randy? I'm sure we could get you a celebrity guest spot on the teacher's roster

 

[sawmikaze]

My buddy bought a Kawasaki Ninja H2 today, it tested at 210mph off the lot. I’m gonna take it for a rip later.

You'll post his obituary soon.

Friction? Maybe just wore down enough over time.

I suppose, but there really isn't any friction. It just catches the clutch drum in that little notch so it spins.

If it was totally broken off it would make more sense to me, I've seen that a few times.

 

[Lnk]

You'll post his obituary soon.


I suppose, but there really isn't any friction. It just catches the clutch drum in that little notch so it spins.

If it was totally broken off it would make more sense to me, I've seen that a few times.

Was just a guess Ryan, I have nothing even remotely like that. All my saws are shindaiwa or Jonsered.

 

[Gullet]

Was just a guess Ryan, I have nothing even remotely like that. All my saws are shindaiwa or Jonsered.

PFFFFT!
Shindaiwa... what a POS! lol

 

[timg]

What's wrong with the machine Tim?

Hey my heavy quip friend. Hope all is good with you and the D2.
Typical low power complaint. This was a low hour dirt machine. Got converted to a third member shear machine. Something is dragging the engine down in multi function. No electronic errors in engine or hydraulic system. So it's challenging for sure. Been tuning on the hydraulics all day on 6 pumps on the open center systems. Will hopefully return on Friday to continue. I can't keep machine down for two consecutive days. You need a Vaca in the states I'll put ya to work LOL!

 

[timg]

Built a gate. Not a slacker.

View attachment 420378View attachment 420379

Looks good Bossman. No waddled holes on the diagonal for the re bar. Measuring techniques and angular drilling deserves a passing grade from @John Wargo.

 

[Lnk]

Looks good Bossman. No waddled holes on the diagonal for the re bar. Measuring techniques and angular drilling deserves a passing grade from @John Wargo.

He probably used trigonometry. Fuggin' genius!

 

[Mastermind]

Wanna stop by the school and teach a class Randy? I'm sure we could get you a celebrity guest spot on the teacher's roster

I'm not a good teacher.

 

[Mastermind]

He probably used trigonometry. Fuggin' genius!

I can't even spell triganomity