SELLING My personal 440 hybrid

[junkman]

I have for sale an ms440 with an 046 D jug that Randy aka Mastermind worksaws modded the jug for me ,this saw is very powerful for one this size ,has about 230 psi comp cold ,about 210 when warmed up ,does not have many hours on it since was built ,I ran a 32 inch bar with .404 chain ,it pulled it real good ,held high rpms in the cut ,this saw tunes out about 15800 piss revving it and does not feel lean at all at that tune .Only reason i am considering selling this is because want to buy a mower for my tractor ,if it don't sell it wont hurt my feelings ,i want $1200 firm .I have had 4 hybrids now ,of all of them this is the baddest mofo of them all .

 

[junkman]

 

[bryanr2]

That’s hawt

 

[BonScott46]

GLPH

 

[Redfin]

Glad to see you dont care about weight with the scrench holder and you took it apart for inspection Brian.

 

[junkman]

Glad to see you dont care about weight with the scrench holder and you took it apart for inspection Brian.

I did not take it apart ,i have done a lot of work with Randy over the years so he did me a special favor and set it up on a saw he had at the shop and mailed me the jug back and i installed it on my saw ,an oem piston was used also.
As for the scrench holder i think i was the first guy to post them on my saws ,handy to have them right there ,i have not lost one yet ,this saw is about a pound lighter than my 461 was ,with a 32 inch light bar it dont feel much heavier than an 036 with a reg 28 inch bar

 

[Redfin]

It took me 27 seconds to read that. You know the drill big B.

 

[whitesnake]

Sweet saw...GLWS

 

[dolmarkid]

Can we get a video of it

 

[junkman]

Can we get a video of it

I do not have any big logs right now or i would ,it pulls the whole 32 inch bar fine in doug fir ,cutting firewood rounds it buzzes through the rounds real quick .

 

[AlfA01]

Nice looking saw. GLWS.