Mastermind Meets The MS400 C-M

[Johnmn]

So no one on this Forum has any real time working the 400 yet?

@Woodpecker does check out his review

 

[Woodpecker]

So no one on this Forum has any real time working the 400 yet?

I believe there was one jackass on here who has plenty of time working one. Like actual real tree work. And the plastic handle didn’t bother him one bit. Because he wipes the lube off his hands on his pants every once in awhile dot dot dot.

 

[Mastermind]

These type of gloves are pretty good for helping with grip.

 

[Johnmn]

A guy could pull the handle and install a shrink wrap grip in about 10 minutes if it was an issue.

 

[Mastermind]

Plastic handlebar or not.....I like what I'm seeing inside of this saw.

 

[MustangMike]

Since I always wear gloves when running a saw, the plastic handles have never bothered me.

 

[cuinrearview]

I don't believe, for a single second, that any of these mfers has grip strength issues.

 

[Mastermind]

I don't believe, for a single second, that any of these mfers has grip strength issues.View attachment 324421

I do. 57 years old, with arthritis in my hands... but I manage.

 

[cuinrearview]

I do. 57 years old, with arthritis in my hands... but I manage.

Can't like. I'm sure I'm headed there the way I abuse my hands in this shop

 

[Mastermind]

Can't like. I'm sure I'm headed there the way I abuse my hands in this shop

Gloves help for a lot of things, but it's pretty much impossible to handle small detailed stuff wearing them.

 

[Stump Shot]

Plastic handlebar or not.....I like what I'm seeing inside of this saw.

Chainsaw ferries?

 

[Stump Shot]

Gloves help for a lot of things, but it's pretty much impossible to handle small detailed stuff wearing them.

These are the bomb...
https://www.ebay.com/itm/1846226916...pHGqmyT3rA%3D%3D|clp:2334524|tkp:BFBMqsvLrM5f

 

[Woodpecker]

These are the bomb...
https://www.ebay.com/itm/184622691673?_trkparms=ispr=1&hash=item2afc5eb559:g:b0AAAOSw7IlgAd34&amdata=enc:AQAGAAACoPYe5NmHp%2B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsS7UXID%2BRPOSNsnm8kYPghtL5hk55jXTMAvUjUn%2BImYTV1wRTYgCuAPohDVd1nP1VLvxqSiFfaTNEels2g7Peh6GELWPnkUwIs2FqvrHu%2FqPqFnBIbSjxR65Co9WGg7j0vLyaXQ6VzVVLJwa6ypBdkbKF3%2FEK6TFQTR5CY26ZWk0Lkhu%2BhqMShakde17MD1QGfOMYYzsBSGAtnRnItP4XIuhBpOXT0VsOdUouB4SDb7c%2FzY4h0yOnEuVRj6Xa9UeByQgTVts5tmZaj7CxvJ9L3I0qNg29GaZW6vtp6m0wLvSX6y5YVfn1O4jEHOmONj%2FQ5ExycRH%2BbnOxyztCTUHvC%2FfltOLTRmGpynOS%2FrZjFna5MDBPv2m%2BNk28%2F7I%2F09KiLo0i0RVjd5lFgVKHsALcAWXrdyptcWLifVHSwHHr9z6qJ01y6czQwMUlbksV3BhMteo3wuPOgWfYSxdFWcqb1JXwHWkkO2Qbzg5BDLuDALq3UDEfp8Zqi%2FIwCvHuoJ6Cw%2FMCaQry7kB9P1LGhOO7UXdGDoIgDaZHVLWy3yRrWvXzmHIpjHRJh2raQp5U6a%2BysIAa5iIMbUiE3G9v%2Bt9a1lQiIOaJQ%2BvZpTWn%2FcTWvtVVoWribtRnhndE2lHeLAd24PKOenEDtfQDOhJ5gT7vjp%2FtGxFTMCjGScZ2mMpjgallUIpHhEDcAahnzSAmd8zqNEcdERoecpWIJYMDNcqp313sNmHfvRuKenJy5fzo7nDYLR6D8sm%2FXHgTWkpws638Ymfe%2BocMahjpYDfPhvW1ZQhM%2BSq5Ls%2F1WXTpvSM114MutclutVWxXg5jdka0liD5keb5bpQfvthv4pHGqmyT3rA%3D%3D|clp:2334524|tkp:BFBMqsvLrM5f

Yes they are! The only glove I’m able to climb in and the Kevlar has saved me a couple times from the razor sharp teeth on my handsaw.

 

[ramrat]

My local dealer I used to work at has them in stock if anyone is interested.

 

[BlackCoffin]

A ported 400 is sounding like the ultimate firewood saw…quick find me an excuse to get one!

 

[av8or3]

I just placed an order for some of those gloves. I have yet to find the perfect set of gloves for myself. But covering my hands has become very important. Looking forward to trying them

 

[Woodpecker]

A ported 400 is sounding like the ultimate firewood saw…quick find me an excuse to get one!

6.25 hp and better than 3.25 lb-ft torque stock in a 60cc size package should have you on the phone with @ramrat

 

[Loony661]

Only in this forum can we take a thread about a ported, new model saw and turn the topic to gloves LOL
Keep up the nice work @Mastermind I love learning these technical things.

 

[rburg]

This is definitely a build thread I have been looking forward to.

 

[JimBear]

Is that what they retail for?