Husqvarna 2100 thread

[Squareground3691]

Dang man! Save some for the rest of us.

I would be too, lol

I need ur future skills,

 

[Al Smith]

Regarding problems with the carb on the 2100 it can mess with your mind .Firstly it's a "rattle ball " governer type which limits high speed revs to keep from blowing the engine .I thought I had that problem and replaced it with a non governed which I had to transfer some of the linkage to make it work .Worked for a while but failed after a long run .Little did I know it was supposed have a rear brace to keep the carb from loosening up .Took me a long time to find it but that cured it .Runs just fine now starts rather easy and cuts like a beaver on steroids .Just info for those who don't know .Pic of the brace .

 

[hacskaroly]

Little did I know it was supposed have a rear brace to keep the carb from loosening up .

Luckily mine still had it attached when I found it or else I would probably be trying to run it without it.

 

[Squareground3691]

Would anyone have a set of thin rings available for 2100 no. 5016984-01 56mm

Thanks,

BUMP

 

[farminkarman]

BUMP

395xp piston swap?

 

[Squareground3691]

395xp piston swap?

Don’t you have to cut base a lot , for skirt length?, Not a direct swap no ?

 

[farminkarman]

Don’t you have to cut base a lot , for skirt length?, Not a direct swap no ?

You are correct, but it is an option if parts are not available.

 

[Squareground3691]

You are correct, but it is an option if parts are not available.

Are your skills available if I need them, ?

 

[Stump Shot]

You are correct, but it is an option if parts are not available.

We didn't have much for good options for quite a while. Now though, there's the Duke's 2100 piston that is an excellent direct replacement.

 

[Squareground3691]

We didn't have much for good options for quite a while. Now though, there's the Duke's 2100 piston that is an excellent direct replacement.

Unfortunately it’s been out of stock, hopefully not for long,

 

[farminkarman]

Unfortunately it’s been out of stock, hopefully not for long,

It has been out of stock since last summer…

 

[hacskaroly]

Now though, there's the Duke's 2100 piston that is an excellent direct replacement.

It has been sold out for over 6 months

 

[Stump Shot]

Unfortunately it’s been out of stock, hopefully not for long,

It has been out of stock since last summer…

@Duke Thieroff

 

[Stump Shot]

Good thing I keep some in stock, so I have one when I need it.

 

[hacskaroly]

And please get more of the performance 261 pistons too...those have been sold out for a while too!

 

[farminkarman]

@Duke Thieroff

Perhaps it was in-stock somewhere in there and I missed it. The 395 piston definitely is a one-way street for a 2100…no going back

 

[Woodwackr]

Good thing I keep some in stock, so I have one when I need it.

Ah, so that’s why there aren’t any left.

 

[Squareground3691]

Amazon.com: #US Replacement Part for Performance Coated Piston Fits for Husq 1100 2100 298 2101 56MM gotepart#2500960 : Patio, Lawn & Garden

Amazon.com: #US Replacement Part for Performance Coated Piston Fits for Husq 1100 2100 298 2101 56MM gotepart#2500960 : Patio, Lawn & Garden

a.co

Same ?

 

[Al Smith]

As an outside thought you might try Definative Dave at ccc in Columbus Ohio . Good ole Dave has a little bit of eveything or knows where to find it .

 

[hacskaroly]

Perhaps it was in-stock somewhere in there and I missed it. The 395 piston definitely is a one-way street for a 2100…no going back

No, I have been watching for it, checking almost weekly. I ended up getting my 2100 piston from Lil' Red Barn off of eBay. I have not run the saw enough to see how it will perform, but the saw does fire up. When Duke's gets theres back in stock, I will be getting one of those too (maybe two of them now that I know @Stump Shot is hording them )