how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Hedgerow]

I built a shelf for them today...

Lol

 

[67L36Driver]

I built a shelf for them today...

Lol

I can set you up with a 30, 40, 50 and a 65.

Just need to clean ‘em up and get them running. [emoji1696]

[emoji48]

 

[Workshop]

Afternoon project. I like 2 wheel wheelbarrows. Gave my old one to daughter, then I was without one. 2nd cousin gave me 2 to make one.
Just in time to load it up with some of Carl's saws.

 

[WKEND LUMBERJAK]

View attachment 187656
Afternoon project. I like 2 wheel wheelbarrows. Gave my old one to daughter, then I was without one. 2nd cousin gave me 2 to make one.
Just in time to load it up with some of Carl's saws.

That is going to be a long trip for you pushing a wheelbarrow.

 

[Workshop]

It would be worth it, though.
It's extra deep and rolls easy.

 

[Hinerman]

View attachment 187656
Afternoon project. I like 2 wheel wheelbarrows. Gave my old one to daughter, then I was without one. 2nd cousin gave me 2 to make one.
Just in time to load it up with some of Carl's saws.

I have 3 of them. They are me front end loaders!!!

 

[Hedgerow]

For Thomas.

 

[Hedgerow]

Those are fillet’s...

Check out earl’s marbling..

 

[WKEND LUMBERJAK]

View attachment 187675
For Thomas.

At least they are not over cooked

 

[Hedgerow]

 

[Workshop]

Lord, that things big.

 

[Louie B]

View attachment 187675
For Thomas.

I'll take three of those..........
I know what they will taste like...

 

[JimBear]

I have acquired a .063” x .325” x 79DL Stihl semi-chisel safety chain. Any idea what model or bar that’s for? My .063 x .325 x 18” chains are 78DL. I have counted it 4 times, I had my friend that gave it to me count the drive links, all counts come up 79; just wanted to be sure I was wasn’t hallucinating.

 

[JimBear]

I also acquired one of these if anyone here is interested in it before I post it elsewhere to find a new home.

 

[67L36Driver]

#3, another Deere 65 runs and cuts. Has a bad AV mount or two.

#4, an Echo 660EVL, runs and cuts but has idle issues. Sitting overnight w/fuel may loosen up the gum.

#5, Echo 500vl, pops on a prime. Try starting him in the morning. [emoji1696]

I’ll have to start using Homie pattern bars with sleeve adaptors as I’m out of D176. [emoji90]

Wrap bent way back. [emoji849]

 

[67L36Driver]

Morning midlanders!

I built a shelf for them today...

Lol

You are going to need a large shelf.

Deere saw tally:

30 x three
35EV
55EV
45EV
50V
65EV x three
60V x three
70V

[emoji48]

 

[sawnami]

If you would, you all might keep Dan (RVALUE) and his family in your thoughts and prayers.

Sent from my SM-T900 using Tapatalk

 

[moparnut88]

If you would, you all might keep Dan (RVALUE) and his family in your thoughts and prayers.

Sent from my SM-T900 using Tapatalk

Do we need to do some kind of raffle or give away or some type of benefit to help?

Sent from my SM-N950U using Tapatalk

 

[Dub11]

I have acquired a .063” x .325” x 79DL Stihl semi-chisel safety chain. Any idea what model or bar that’s for? My .063 x .325 x 18” chains are 78DL. I have counted it 4 times, I had my friend that gave it to me count the drive links, all counts come up 79; just wanted to be sure I was wasn’t hallucinating.

I imagine the robot had a brain fart that day.

If you would, you all might keep Dan (RVALUE) and his family in your thoughts and prayers.

Sent from my SM-T900 using Tapatalk

Do you know if there is another way of sending money like maybe PayPal?

 

[sawnami]

I'm not familiar with how this type of funding works. At this time Facebook is the one that is set up.

Sent from my SM-N950U using Tapatalk