how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Hedgerow]

How much to advance the timing? Half a key?

At least.. I go more usually. But not always.
Use a piston stop when re-setting the flywheel, or it can move a little on ya when tightening.
Clean, dry surfaces and a couple braps with a cordless impact.

 

[moparnut88]

Whaddaya buff it with?

I use buffing compound for clear coat. It's the 3m extra cut. It'll cut a 1200-1500 grit scratch. But mothers has a buffing compound I've used with success b4.


Sent from my iPhone using Tapatalk

 

[Workshop]

Whaddaya buff it with?

I've bought plastic polishing compound before.

 

[67L36Driver]

Teach the kid to fish and he out does grandpa.[emoji6]

Thank you MODOC!

 

[67L36Driver]

I think Brody had the advantage. He was throwing a 1/4 oz silver Little Cleo while gramps needed 3/8 oz to make his baitcaster work properly.[emoji848]

I did have to school him how to use his forefinger and thumb to hold them proper.

 

[countryhog]

Nother question on the stihl

Saw came without fronr bar nut. Playing with the stud and it just pulled out. Guessing someone torqued it pretty good cause i dont see any threads. Anyone got any ideas how to set the stud so it can take a nut ir should i just leave it out

 

[67L36Driver]

Jerry. Get the oversized stud (9mm ?) from your local Stihl dealer.

Happens all the time with their homeowner models.[emoji13]

 

[countryhog]

Jerry. Get the oversized stud (9mm ?) from your local Stihl dealer.

Happens all the time with their homeowner models.[emoji13]

Thanks carl

 

[SteveSS]

Whaddaya buff it with?

New plastics are pretty cheap if you keep an eye on ebay.

 

[Locust Cutter]

Dad's old 039 that he bought new in '92-94 was a great saw for years. I then found pre-link bucks AS, opened the muffler a good bit and defeated the limiters. It found 2 new gears. Ran great right up to the ay that it was set ablaze n a truck... I've "fixed" a few 029s and they do VERY well afterwards, but they're loud. A friend has worked a muffler mod out which redirects the sound waves a few times, with little restriction and is both far better flowing and not loud. Nearly eliminates the higher frequencies and is VERY nice. The 261 is done that way now and the Stumpbroke will be shortly. It and I may be better friends after that.

 

[Locust Cutter]

Regained custody of the old Dodge yesterday.

I filled a lawn/leaf bag with the trash out of it. At least Mike didn’t throw the crap out on the street.[emoji6]

This will let us make more trips without the ‘ball & chain’ (Blondie).

Thunder runs to Bishops, etc..

Carl, what year Elky is that and what's the driveline???

 

[67L36Driver]

Carl, what year Elky is that and what's the driveline???

Elky? Translate please.[emoji848]

1995.

3.0 L v6, three spd auto. AC don’t work but most everything else does.

Originally the Dodge was owned by an old couple in Fort Scott, Ks.

By my calculation they put just short of 5,000 miles/year on it.

I bought it to give son a go to work car.

 

[67L36Driver]

Morning midlanders.

Tips on fixing Dodge OHC oil leaks?

Local shops have tried twice.[emoji37]

 

[WKEND LUMBERJAK]

Stay cool guys heat wave coming.

 

[Hinerman]

Elky? Translate please.[emoji848]

1995.

3.0 L v6, three spd auto. AC don’t work but most everything else does.

Originally the Dodge was owned by an old couple in Fort Scott, Ks.

By my calculation they put just short of 5,000 miles/year on it.

I bought it to give son a go to work car.

Elky=El Camino

good morning everybody

 

[67L36Driver]

Elky=El Camino

good morning everybody

None of them here.

Background is ‘67 vet. 390 hp w/4spd.

 

[Dub11]

None of them here.

Background is ‘67 vet. 390 hp w/4spd.

F these saws! I'd be going through tires with that vette!

 

[Workshop]

Morning everybody.

 

[Workshop]

Just got Lilly back from the Vet. Spayed.
I was worried all day. You hear all the horror stories about them dieing under anesthesia, but she's doing fine. A little sore but ok.
Now, maybe I can settle down.

 

[cobey]

View attachment 95910
Just got Lilly back from the Vet. Spayed.
I was worried all day. You hear all the horror stories about them dieing under anesthesia, but she's doing fine. A little sore but ok.
Now, maybe I can settle down.

I' glad she's ok Steve