how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[sawnami]

Old pic of mine for comparison.

Sent from my SM-N950U using Tapatalk

 

[67L36Driver]

Are the screws that hold down the breaker plate the shouldered ones?

Sent from my SM-T900 using Tapatalk

Yup.

I need to put a dial indicator on the crank as it might be bent.[emoji15]

Only other thing that I can figure why it would drag the magnets.[emoji13]

 

[sawnami]

Yup.

I need to put a dial indicator on the crank as it might be bent.[emoji15]

Only other thing that I can figure why it would drag the magnets.[emoji13]

Does it drag in one spot or full rotation?

Sent from my SM-T900 using Tapatalk

 

[sawnami]

Put an OEM Mercury starter rope on the Disston. It even uses the steel anchor pin in the rope just like the original.

Sent from my SM-N950U using Tapatalk

 

[Dustin]

It's healing up

Sent from my SM-G935T using Tapatalk

 

[sawnami]

Puttin a headlamp bulb in one of the Bavarian Made Wrecks. [emoji52]
Simple huh?

Sent from my SM-N950U using Tapatalk

 

[67L36Driver]

Got the new rim put on at Walmart. Cost $3.26 for a new valve stem.

Hurray lifetime balance and road hazard guarantee! [emoji16]

Tire was undamaged![emoji108]

My 6# hammer refurb.

 

[WKEND LUMBERJAK]

Got the new rim put on at Walmart. Cost $3.26 for a new valve stem.

Hurray lifetime balance and road hazard guarantee! [emoji16]

Tire was undamaged![emoji108]

My 6# hammer refurb.

Looks fubared

 

[67L36Driver]

Looks fubared

It was much worse before I hammered it out.[emoji6]

 

[Dustin]

Toro master parts book 1965

Sent from my SM-G935T using Tapatalk

 

[sawnami]

My electric pump quit so I took this out of the box and got it running. It'll push around 3000 gal. by the time it's over.

Sent from my SM-N950U using Tapatalk

 

[Dustin]

Couple saws I got today
Barker
Mono.
And this 2 cylinder

Sent from my SM-G935T using Tapatalk

 

[Dustin]

Clinton

Sent from my SM-G935T using Tapatalk

 

[moparnut88]

Couple saws I got today
Barker
Mono.
And this 2 cylinder

Sent from my SM-G935T using Tapatalk

What is the 2 cylinder?


Sent from my iPhone using Tapatalk

 

[Dustin]

What is the 2 cylinder?


Sent from my iPhone using Tapatalk

Don't know ,no numbers or markings

Sent from my SM-G935T using Tapatalk

 

[moparnut88]

Don't know ,no numbers or markings

Sent from my SM-G935T using Tapatalk

It looks really cool! Wonder how many cc it is?


Sent from my iPhone using Tapatalk

 

[Dustin]

What is the 2 cylinder?


Sent from my iPhone using Tapatalk

Has a r.e.phelon ignition

Sent from my SM-G935T using Tapatalk

 

[Dustin]

It looks really cool! Wonder how many cc it is?


Sent from my iPhone using Tapatalk

It's not locked up pistons are fair but no carb,exhaust and one plug wire gone

Sent from my SM-G935T using Tapatalk

 

[moparnut88]

It's not locked up pistons are fair but no carb,exhaust and one plug wire gone

Sent from my SM-G935T using Tapatalk

Idk what I'd do with that but that thing would be cool to play with!


Sent from my iPhone using Tapatalk

 

[Dustin]

Idk what I'd do with that but that thing would be cool to play with!


Sent from my iPhone using Tapatalk

I seen a power products look like it and the Maytag motor look similar to it

Sent from my SM-G935T using Tapatalk