how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Dub11]

We got the rim beat back to fairly close but can’t get the bead to catch. [emoji20]

Ordered a new wheel off evilbay.

Rockauto canceled my first order as they were out of stock.[emoji13]

Fixed! Got the bead to catch and it holds air.[emoji106] Servicable until the new wheel gets here.

Good to hear!

 

[WKEND LUMBERJAK]

We got the rim beat back to fairly close but can’t get the bead to catch. [emoji20]

Ordered a new wheel off evilbay.

Rockauto canceled my first order as they were out of stock.[emoji13]

Fixed! Got the bead to catch and it holds air.[emoji106] Servicable until the new wheel gets here.

At least you will have a spare.

 

[cobey]

We got the rim beat back to fairly close but can’t get the bead to catch. [emoji20]

Ordered a new wheel off evilbay.

Rockauto canceled my first order as they were out of stock.[emoji13]

Fixed! Got the bead to catch and it holds air.[emoji106] Servicable until the new wheel gets here.

You could put a tube in it if it slow leaks

 

[67L36Driver]

I haven’t beat a rim back in shape since my HS buddy and I raced a stock car in 1970. [emoji26]

 

[cobey]

With this squish no wonder it sucked to
Try to start, gonna aim for .030

 

[cobey]

On this....

 

[67L36Driver]

Buy the thick gasket from Stihl dealer?

 

[Digger's Dad]

View attachment 94529
With this squish no wonder it sucked to
Try to start, gonna aim for .030

You're going the wrong way. Send it down here - bum shoulder or not I'll bet I can start that thing.

 

[Workshop]

I think I'd just put a standard base gasket on it and a D handle.





(And wear a cup)

 

[cobey]

Buy the thick gasket from Stihl dealer?

Ya

 

[cobey]

You're going the wrong way. Send it down here - bum shoulder or not I'll bet I can start that thing.

I Don't want to break the Chinese crank..

 

[cobey]

I think I'd just put a standard base gasket on it and a D handle.





(And wear a cup)

I guess that's a plan....
I'm not gonna sit on it to start it again

 

[Hedgerow]

No way....

Cobey has to keep and run that dumb thing...

 

[Hedgerow]

I guess that's a plan....
I'm not gonna sit on it to start it again

Oh yes you are....

No short cuts..

 

[cobey]

No way....

Cobey has to keep and run that dumb thing...

660's in stock form suck so bad, heavy,
Slow turds, but might save me from killing my smaller saws by running them bar deep
My other saws running

 

[cobey]

Oh yes you are....

No short cuts..

I'll try the squish at .020
I have a better top end for it to

 

[cobey]

If I break the crank, I'll put a better one in

 

[cobey]

Ya

Oh yes you are....

No short cuts..

It will probably happen again, if not
With this saw probably another.
If I was around Alan's bigger saws
Probably sooner than later

 

[Fishnuts2]

Hi Wayne

Hey Cobey!
Good Morning to you all!

 

[cobey]

Hey Cobey!
Good Morning to you all!