how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[67L36Driver]

Any of you fellas have a Jonsered 2051, 2054 or 2055 carcass?
Need rear AV spring bits.

 

[WKEND LUMBERJAK]

Get a move on men daylight is wasting .

 

[67L36Driver]

Morning midlanders.

Going to be a beautiful day in Mr. Roger's neighborhood![emoji16]

 

[Workshop]

Morning everybody.

 

[Hedgerow]

I actually kicked the heat on.
House worked its way down to 65..

 

[67L36Driver]

I actually kicked the heat on.
House worked its way down to 65..

I had ours set on 75. Knocks the chill off.

Oly #3 hit KC, Ks sort facility four hours ago.[emoji848]

Ongoing negotiations for the 'NIB' 038.

Ben has found a MS880 he is interested in. Me, not so much. But, I'll help him fix it up.

 

[hoskvarna]

Morning fellars [emoji295]️


Sent from Hoskvarna Hills

 

[67L36Driver]

Olympyk #3:

Bottom with most of its paint!

Have to clean up the rewind to get any further on the evaluation. Stuck.

 

[Workshop]

No going back now. At least there's plenty of room for a wash tub. Lol.

 

[67L36Driver]

Oly #3 started and ran on the second dribble of fuel. One pull restart after mounting bar/chain. [emoji7]

Recoil pulley is cracked between a pair of 'teeth' causing it to jam a bit.

It could use a comp release.[emoji15]

 

[countryhog]

Oly #3 started and ran on the second dribble of fuel. One pull restart after mounting bar/chain. [emoji7]

Recoil pulley is cracked between a pair of 'teeth' causing it to jam a bit.

It could use a comp release.[emoji15]

Got a pic?

 

[67L36Driver]

Got a pic?

Recoil pulley? Or, whole she'd bang?

Rope may be some of the problem being too small and pinch in the groove. Won't hurt to go up a size or two.

 

[countryhog]

Thought i might have one but dont. Id bet on the rope. Ive had that problem myself for starters that wont rewind
While thats a pretty substantial crack the working part still looks solid. Id probly take a soldering iron and weed wacker cord after it though after i realigned it

 

[67L36Driver]

Put on a 4.5mm rope. Silicone sprayed the spring and Lubriplate on the pulley spindle. Works better.

One pull restart after sitting 2 1/2 hours.[emoji15]

 

[Workshop]

Evening everybody. Got everything pulled out and cleaned up. Also, son and I took his doner truck to the scrap yard. He got everything off it that he needed for his Bronco, so it's now out of the way. Had an old camper frame sitting out back. Took it over to Dustin. He'll get good use out of it. Now I'm too tired to work on the bathroom. Tomorrow I'll do the plumbing and get the new tub set in.

 

[Workshop]

Cobey, how's the Church?

 

[Workshop]

Hey everybody. Looking for something for my granddaughters. A gocart. Something cheap. Broken/doesnt run/needs engine, whatever. My son and I can repair it. Daughter was reminiscing about the one I got for her and the boys when they were young and how much fun they had. Tore up the back yard, but they had fun. If you've got something, shoot me a pm. Hopefully not too far away.

 

[cobey]

Cobey, how's the Church?

I have a guy coming in the morning
To look at it, he claims he can fix it for
A 1000 bucks. He had a good relationship with the city. It's alot of money, but
It would be safe and legal

 

[67L36Driver]

Triplets:

And, morning midlanders!

Getting showers here.

Going back to bed. The ibuprofen kicked in.

 

[WKEND LUMBERJAK]

We did get a nice shower Hope everyone has a great day.