how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[cobey]

I took the base gasket out of my 2159
Today and changed the intake boot and
All that crap. ... that clamp was a pain.
Been trying to make room in my shed
So it's easier to find stuff, and work in there

 

[WKEND LUMBERJAK]

View attachment 60090 View attachment 60091 View attachment 60092
This was my view for the last two days getting windshield time, helping to deliver 51x 6' round bales to the fire area in Ashland KS... I don't have the words to describe the abject loss there... I do have the words to describe the anger I have for my newfound exhaust leake between the y-pipe and the turbo on my 7.3 as I can't build more than about 12 psi and the hills were a struggle with a fully loaded 25' dual-tandem GN trailer... We got it done though.

Heard there was one county that lost 35000 head. Astronomical losses.

 

[cobey]

Heard there was one county that lost 35000 head. Astronomical losses.

Bad deal

 

[WKEND LUMBERJAK]

Going to have to find a cheaper source of protein.

 

[WKEND LUMBERJAK]

Sure don't feel like no 7:55.

 

[Hedgerow]

No, no it don't.

 

[Louie B]

Sorta makes you late before you start

 

[67L36Driver]

Morning midlanders!

Why you shouldn't use a pressure washer (or dunk them in the creek):

Surprisingly enuff, the piston/rings/cylinder should clean up to use on my 100psi 'runner'.

 

[WKEND LUMBERJAK]

Sorta makes you late before you start

 

[Louie B]

Your the winner Carl
15000 th post

 

[WKEND LUMBERJAK]

Morning midlanders!

Why you shouldn't use a pressure washer (or dunk them in the creek):

Surprisingly enuff, the piston/rings/cylinder should clean up to use on my 100psi 'runner'.

Man thats ugly

 

[67L36Driver]

Man thats ugly

I'm quite confident the crankcase assembly will go out in Monday trash collection.

15,000, Really!

Do we gets a prize?

 

[Sawcrazy]

Morning midlanders!

Why you shouldn't use a pressure washer (or dunk them in the creek):

Surprisingly enuff, the piston/rings/cylinder should clean up to use on my 100psi 'runner'.

Ouch! What saw is that??


Sent from my iPhone using Tapatalk

 

[Workshop]

Morning everybody.
Coffee is having a hard time getting things going this morning. Might need a second cup.
The best thing about daylight savings time is at the end of the day. But its the beginning of the day that sucks. I think they should initiate it over a four week time span. 15 minutes a week.

 

[hoskvarna]

Or they could just leave it alone!!!


Sent from Hoskvarna Hills

 

[sawnami]

Morning everybody.
Coffee is having a hard time getting things going this morning. Might need a second cup.
The best thing about daylight savings time is at the end of the day. But its the beginning of the day that sucks. I think they should initiate it over a four week time span. 15 minutes a week.

Gottcha beat Steve. I'm on #4.

Sent from my SM-T900 using Tapatalk

 

[Workshop]

Had been having troubles with Rubydoo and trailer wiring. Previous owner had already put in the T-harness connector a long time ago. I was getting 1 turn signal, no running lights and no brake lights at my seven way connector. Ordered in a new T connector. Got all kinds of crud out of the old one when I took it out. Installed the new one, with electrical grease. Problem solved. Everything works at the 7 way.
Rubydoo is now ready to pull the camper.

 

[67L36Driver]

Ouch! What saw is that??


Sent from my iPhone using Tapatalk

012 evilbay parts carcass. Snagged it for possibly good oil pump and P/C.

Got the rings freed up, cylinder wall looks good. Oil pump looks 'iffy'.

The 100psi 'runner'.

Came with two near new chains, good bar and has all the good stuff (chain brake) of the 009, 010, 011, and 012 series.

 

[sawnami]

Was going through some vintage literature and stumbled across these 1932 pics in an article.

Sent from my SM-N910V

 

[sawnami]

Why waste time bringing the bigger stuff out when 26cc's will do the job?

Sent from my SM-N910V