how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Workshop]

SealAll job on the fuel tank of the Craftsman worked. Not a drop now.
Primer bulb is a little tight but primed everything just the same. Choked it and pulled a few times and it fired up and idled nice. But now I've got to find the choke linkage that vibrated out and into the black hole that occupies my corner of the shop.

 

[jeepsnchainsaws]

Easy fix.

View attachment 44555

That looks WAY BETTER! I was scared at first!

 

[Dub11]

Finally got the Christmas tree up feel like it a game of Russian roulette waiting for the two year old to climb it and knock it over

 

[lumberjackchef]

That looks WAY BETTER! I was scared at first!

It is actually left handed though he flipped the real picture over to make it look normal.....

Sent from my N9516 using Tapatalk

 

[Dub11]

Iam left handed so you should just give it to me. lol

 

[Ethan Hamby]

My tools I borrowed with a lot of carbide bits to port my cylinder. Lol. Or smooth the ports and transfers out at least

 

[Hinerman]

in on pg 500

 

[Hinerman]

10000th post

 

[Workshop]

Was wondering who would notice.

 

[Ethan Hamby]

Needle files get clogged way to fast for this! Lol just tried them. Pen grinders with carbide bits it is.

 

[cobey]

Digitals are OK but I like to see the swing on a dial to get the range more readily, kind of like reading a clock if ya will.

With engine and car stuff I like the good old dial Stuff, at my work I use the digital
It's good enough for their stuff.
Engine stuff measures at 50 to 80 degrees.
Cranks and stuff comin out of the hot tank measure big lol

 

[67L36Driver]

10000th post

Potlikker!

 

[WKEND LUMBERJAK]

Potlikker!

Carl how's Jim. Tried calling earlier. No answer.

 

[Workshop]

Carl how's Jim. Tried calling earlier. No answer.

I talked with him Monday evening. Everything was good then.

 

[cobey]

With engine and car stuff I like the good old dial Stuff, at my work I use the digital
It's good enough for their stuff.
Engine stuff measures at 50 to 80 degrees.
Cranks and stuff comin out of the hot tank measure big lol

I hate dealing with machine shops. ...
There are a couple good ones about 40 miles
From here I found lately ... I wish I had the stuff to do my own.
I have been known to look for used engines
To freshen up that have trusted machine work
Rather than trust "fly by night" crap work.
I had a late machinest bone me from beyond
The grave with some shoddy work on a rotating assembly. ..
At least too tight and a backwards piston can be fixed
When found ahead of time

 

[Homelite410]

Morning all! Here is what I awoke to in the stove!! Hackberry, hickory and cherry!

Now see if n the old s-10 will fire up and off to Casey's for some dark roast!!

 

[WKEND LUMBERJAK]

Here's my cup morning mike

 

[Dub11]

Morning all! Here is what I awoke to in the stove!! Hackberry, hickory and cherry!

Now see if n the old s-10 will fire up and off to Casey's for some dark roast!!

Ya dont brew your own coffee?

 

[Dub11]

Morning Kenneth

 

[Homelite410]

Ya dont brew your own coffee?

I do but had time constraints this am..