how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[countryhog]

any a youse guys happen to have a poulan 306A clutch cover? been looking. no dice so far.

Bump

 

[67L36Driver]

I'm talking 3/8" low profile. 46cc isn't going to be happy with full size.

 

[cobey]

First thing you do on them 46/18 or 46/20 is put a 16" bar on it.

I don't think I would spend the $$
To buy a bar for for this saw.
Bar and sprocket worn but useable.
Kind of a driver flip saw
The lady was in need, I paid for
For storie, and got lucky
The saw was fixable.
The lady was in rough shape

 

[Fishnuts2]

First thing you do on them 46/18 or 46/20 is put a 16" bar on it.

Made a nice improvement on my 46/20!
I used .325 so as not having to change the sprocket. Good advice.


Sent from my iPhone using Tapatalk

 

[67L36Driver]

Have to pull the flywheel to get the fuel tank (split neck) out of the Craftsman.

None of the pullers I have can get in there. Visit Harbor Freight in the morning and shop.

 

[cobey]

I would like to get my hands on
The poulan 5020 that is at the pawn shop
He has $69 on it, it uses the small
Husky mount bar and 3/8 chain .
I am 50cc Saw poor, only 2
026 and 450 husky. They are handy
Maybe not the 026 I never use it lol
Its been for sale for a year

 

[countryhog]

Have to pull the flywheel to get the fuel tank (split neck) out of the Craftsman.

None of the pullers I have can get in there. Visit Harbor Freight in the morning and shop.

What kinda saw?

 

[cobey]

I would like to get my hands on
The poulan 5020 that is at the pawn shop
He has $69 on it, it uses the small
Husky mount bar and 3/8 chain .
I am 50cc Saw poor, only 2
026 and 450 husky. They are handy
Maybe not the 026 I never use it lol
Its been for sale for a year

I let the kids play with it in ft. Scott

 

[67L36Driver]

What kinda saw?

Poulan 3700, 3800 ??

Has a bunch of crank end play. [emoji37]. .039"

But, no felt radial play.[emoji848]

Prolly just box it up.

 

[67L36Driver]

I did get a nice 20" Sandvik bar and loop of Carlton chizel with it.[emoji106]

 

[Hinerman]

Bad news first. I went to mom's to finish the big sycamore. Wrecked 2 chains on the 660 (113 drivers) trying to get the stump. What is in these freaking stumps?

Good news. I finished the sycamore at my mom's, less the stump. The Dozer Dan 346 with square file chain (by Matt) is insane in soaking wet sycamore. Definitely makes me want to start square filing (with a grinder of course).

Later.

 

[67L36Driver]

Morning midlanders!

 

[Jetmd]

Morning Carl, you guys have a safe Friday!

 

[WKEND LUMBERJAK]

Another wet day.

 

[sawnami]

I would like to get my hands on
The poulan 5020 that is at the pawn shop
He has $69 on it, it uses the small
Husky mount bar and 3/8 chain .
I am 50cc Saw poor, only 2
026 and 450 husky. They are handy
Maybe not the 026 I never use it lol
Its been for sale for a year

Cobey, I can fix you up with some Poulans as long as I don't have to pay you to take them.

Sent from my SM-T900 using Tapatalk

 

[67L36Driver]

Cobey, I can fix you up with some Poulans as long as I don't have to pay you to take them.

Sent from my SM-T900 using Tapatalk

I made one good 46cc out of two. Lasted less than 36 hours on C'list for $75.

I was ashamed to ask more than that.

 

[67L36Driver]

Always check the four bolts holding the engine in the chassis on them. They are always loose and leads to their distruction.

 

[countryhog]

Poulan 3700, 3800 ??

Has a bunch of crank end play. [emoji37]. .039"

But, no felt radial play.[emoji848]

Prolly just box it up.

you don't need no stinking puller. loosen the nut, spray kroil (or other thread release agent), wiggle a small pry bar (such as found at HF) under an edge of the flywheel, hit the side of the flywheel (anywhere but on the magnets) with a fiber or rubber hammer while putting pressure with the bar. it'll come off.
alternatively, hit the end of the crank with a real hammer - not advised but been done

 

[cobey]

Always check the four bolts holding the engine in the chassis on them. They are always loose and leads to their distruction.

They were tight

 

[67L36Driver]

Flywheel off the Craftsman. Jammed a large screwdriver behind it and wacked the counter weight with a MFH (medium).

Clean up next and see Jim about a fuel tank.