how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Workshop]

Headed down to the Stamp tomorrow afternoon. Busy weekend planned.

 

[I saw a lot]

Turning cooler tomorrow with plenty of wind, wood rack filled, furnace is still off.

 

[Only the Tony]

Morning all, 49° now with high of 65°. Looks to be getting up to 75° tomorrow and then Sunday and Monday the bottom drops out again. Calling for mid-teens Sunday night. Looks like I need to bring up a little more wood.

 

[Workshop]

Morning everybody.

 

[Sawdust Man]

Good morning.

 

[JimBear]

Good morning.


View attachment 485011

Let us know how it turns out.

I have heard of opossum pie, maybe there are set of those pie dishes, see if you can collect them all.

 

[Junk Meister]

Let us know how it turns out.

I have heard of opossum pie, maybe there are set of those pie dishes, see if you can collect them all.

Search "GRANNY" or "The Beverly Hillbillies" for a recipe.
Then have a Proto Plate made and get RICH!!
I have enough projects in my head So I just threw this out here for entertainment value.
On a Serious note My Cuzzen Ken" swore by frying Squirrel Meat Throw out the squirrel and make Gravy with the drippings. I never had the chance to try it but his wife could make a great snapper turtle stew or chili.

 

[nbbt]

G-Afternoon fellas and gals !

 

[Workshop]

Made it to the Stamp. Loaded up the Ferguson and brought it down here to its new home.

 

[Only the Tony]

Morning all, 47° with high of 75°. Early rise, going to go coffee route for a bit before trying to hit the water to relax before the weather change tomorrow. Hoping these take a couple days off from dropping until it is warmer but that is not how things usually work around here.

 

[EFSM]

frying Squirrel Meat Throw out the squirrel and make Gravy with the drippings.

You mean not even eat the squirrel meat? What a pity. It’s fine tasting stuff, a lot like rabbit, but they’re difficult to dress without getting hair on the meat.

 

[WKEND LUMBERJAK]

 

[nbbt]

Good afternoon folks. Just hanging out waiting for the claim of the sky to start falling . . . 12"- 18" in the next 48 hrs.

 

[Workshop]

since we’re leaving the Ferguson at the Stamp from now on we figured it was better to clean out and rearrange the old storage building (where I keep the Bolens tractor) than leaving it outside. After getting it all cleaned out and stuff tetrised in place I figured I’d better measure the door opening for clearance. Less than 1/2 inch on each side. Took a few try’s to get absolutely straight but it went in.
So now it can be kept inside.

 

[Sawdust Man]

Too hot for this kind of nonsense.....

 

[Workshop]

Too hot for this kind of nonsense.....View attachment 485120

Yessir, it sure is. Running the A/C in the big camper today.

 

[Hedgerow]

Old scrap iron lives..
Rebuilt and re-thought.
Moved the axle, new 8x10 beam and pusher.
Wedge got bevelled and got 6 passes of 7018..

 

[WKEND LUMBERJAK]

since we’re leaving the Ferguson at the Stamp from now on we figured it was better to clean out and rearrange the old storage building (where I keep the Bolens tractor) than leaving it outside. After getting it all cleaned out and stuff tetrised in place I figured I’d better measure the door opening for clearance. Less than 1/2 inch on each side. Took a few try’s to get absolutely straight but it went in.
So now it can be kept inside.

Know to get it out

 

[stihl livin]

View attachment 485121

Old scrap iron lives..
Rebuilt and re-thought.
Moved the axle, new 8x10 beam and pusher.
Wedge got bevelled and got 6 passes of 7018..

I got a dollar that says Thomas can still break it.

 

[Hedgerow]

I got a dollar that says Thomas can still break it.

He can try.. but that beam will remain..
It’s so heavy, Im gonna have to put a Jack stand on the wedge end to support it when hoisting large rounds and running the 4 way.