how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Workshop]

Morning everybody.
Gas hit $3.59 here.

 

[BrettL]

Good morning y'all. Gotta fix my splitter today.

 

[hoskvarna]

Not good for sure
Here not yet


Sent from Hoskey hilltop

Today diesel is $4.29 /gal [emoji2959]


Sent from Hoskey hilltop

 

[moparnut88]

Today diesel is $4.29 /gal [emoji2959]


Sent from Hoskey hilltop

Can’t like this. At this rate I wouldn’t be surprised to see $5/gal. My wife was like I need a cheap car for gas mileage. Lol. I hope it gets better soon.


Sent from my iPhone using Tapatalk

 

[JimBear]

Today diesel is $4.29 /gal [emoji2959]


Sent from Hoskey hilltop

I heard it took a big jump

 

[JimBear]

What’s the group opinion of Dolmar 510 ? Jonsered 2050 or 2250, I can’t recall the model off the to of my head ?

 

[JimBear]

Can’t like this. At this rate I wouldn’t be surprised to see $5/gal. My wife was like I need a cheap car for gas mileage. Lol. I hope it gets better soon.


Sent from my iPhone using Tapatalk

You can wish in one hand & crap in the other, let me know which one gets filled first… I know which one I am betting on.

 

[I saw a lot]

Jumped to $3.69 regular 10% and $3.90 - $4.55 diesel at truck stops.

 

[Hinerman]

Today diesel is $4.29 /gal [emoji2959]


Sent from Hoskey hilltop

I saw $4.61 about an hour ago!!!

 

[Hedgerow]

FJB

 

[hoskvarna]

I saw $4.61 about an hour ago!!!

Sent from Hoskey hilltop

 

[Workshop]

Morning everybody.

 

[Workshop]

What’s the group opinion of Dolmar 510 ? Jonsered 2050 or 2250, I can’t recall the model off the to of my head ?

I have a 510 that I like now.
With that said, it was a great runner from the factory but mine had the nonadjustable carb and the catalytic converter muffler. I acquired a spare parts saw from Kenneth that had the adjustable carb. I swapped out the carb, gutted the muffler, drilled a 1 inch hole in the front of said muffler and advanced the timing 10 degrees. Now it's a REAL runner.

 

[67L36Driver]

Dolmar: Everything a Stihl or Husqvarna wants to be.

Regular unleaded went up thirty cents here yesterday morning. [emoji90]

 

[JimBear]

I saw $4.61 about an hour ago!!!

That’s crazy, especially since Oklahoma was always the cheapest place to buy diesel. A truck stop out to Braman on I-35 & a Phillips 66 on OK Hwy 10 east of Miami were usually the cheapest.

 

[JimBear]

FJB

Don’t hold back Matt tell us what you really think. Lol.

 

[Cat 525]

Dang wind howling again today!

 

[Hedgerow]

What’s the group opinion of Dolmar 510 ? Jonsered 2050 or 2250, I can’t recall the model off the to of my head ?

Of those 3, the 2250 would be my choice.,

Make sure those muffler bolts are tight..

 

[JimBear]

I have a 510 that I like now.
With that said, it was a great runner from the factory but mine had the nonadjustable carb and the catalytic converter muffler. I acquired a spare parts saw from Kenneth that had the adjustable carb. I swapped out the carb, gutted the muffler, drilled a 1 inch hole in the front of said muffler and advanced the timing 10 degrees. Now it's a REAL runner.

My buddy has them sitting in his shed along with a Crapsman & an Echo 501 EVL or something in that size range. I have no idea if they run or not. I keep forgetting to asking him. I have no interest in the Crapsman or the Echo.

 

[Hinerman]

My buddy has them sitting in his shed along with a Crapsman & an Echo 501 EVL or something in that size range. I have no idea if they run or not. I keep forgetting to asking him. I have no interest in the Crapsman or the Echo.

If it is the right Echo, you can get a brand new free saw;

CS-500VL Flywheel Recall (1986 - revised 2020).pdf (echo-usa.com)