how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Ethan Hamby]

Or get a deflector, cut a hole, and weld it on haha

 

[Homelite410]

No welds on mufflers, bad idea.

 

[Ethan Hamby]

*braze it

 

[Ethan Hamby]

No welds on mufflers, bad idea.

I'm curious why? I've seen everyone brazes them.

 

[countryhog]

Not by me. I have too many projects now.[emoji21]

Owner looking to move it along.

I'm going to suggest he find a friend selling junk on evilbay.

Hows p/c look? Got spark? Everything there?

 

[Workshop]

Big difference between welding and brazing. I think you were referring to brazing, but "Welding" is a term most use as a catch all phrase.

 

[Ethan Hamby]

I know the difference I can do both I'm just not sure why you wouldn't mig it lol

 

[Ethan Hamby]

Small awg wire and be careful and it would weld fine

 

[Homelite410]

The muffler is so thin that you'll burn through no matter how hard you try. Tig yes, mig, no. Silver braze, yes. If you pay attention the muffler's are braised from the factory.

 

[hoskvarna]

The muffler is so thin that you'll burn through no matter how hard you try. Tig yes, mig, no. Silver braze, yes. If you pay attention the muffler's are braised from the factory.

Not to mention mig Bb's.


Sent from Hoskvarna hills

 

[Workshop]

The muffler is so thin that you'll burn through no matter how hard you try. Tig yes, mig, no. Silver braze, yes. If you pay attention the muffler's are braised from the factory.

Very well put, Mike.

 

[Homelite410]

Not to mention mig Bb's.


Sent from Hoskvarna hills

Good point mark!

 

[Workshop]

I can weld and braze, too. I've seen Mike's brazing. Extremely nice. Whereas my brazing is like a 5 year old with crayons trying to stay inside the lines.

 

[Homelite410]

I can weld and braze, too. I've seen Mike's brazing. Extremely nice. Whereas my brazing is like a 5 year old with crayons trying to stay inside the lines.

Don't be so hard on yourself Steve!

 

[Ethan Hamby]

My hands are screwed up so it's rather hard for me to make anything look right lol

 

[Ethan Hamby]

Freeform skills like welding I mean

 

[Workshop]

Don't be so hard on yourself Steve!

Mines not pretty by even the worst standards. But it holds up under a hammer. That's all that matters to me.

 

[Homelite410]

Carpal tunnel?

 

[WKEND LUMBERJAK]

it's been a long day.

 

[concretegrazer]

I don't like to weld. If I'm welding somethings broke. Need to try brazing again.