how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Louie B]

So will this follow the wood splitter around now?

I'm sure a beefier splitter would be cheaper.

Thought about "Ole Scrap Iron" when I saw that welder.

 

[Hedgerow]

I’ve never seen that brand around here. Looks like it’s pretty decent though. Looks to be both cv/cc. You’ll like that. Give you the option to run a spool gun or wire feeder on steel for production.


Sent from my iPhone using Tapatalk

Yes, you can get the suitcase for wire.

Wheeler metals had a certain company make them a proprietary brand they could sell..
Guy at wheeler said they had 150 of em in service around Sprinfield.

 

[Hedgerow]

Well guys

I ended up in the creek today! Found out my gymnastic talent will let me somersault backwards into the drink! End of logging for the day! Left saw up on the bank still idling till my help got there to help yank me out. Ruined phone and pride I say!

Ida liked to see that unfold..

 

[Cat 525]

Everybody stay dry today! Ha ha! Good day to fly a kite!

 

[Cat 525]

Ida liked to see that unfold..

Yep! My saw stayed on the bank up above still idling. My nephew could hear it but couldn't see me. O well. The water was a soft landing with just a skiff of ice.

 

[Hedgerow]

It’s cold out there..

Had to go get some stove fodder out of the woodshed.

 

[Hedgerow]

Yep! My saw stayed on the bank up above still idling. My nephew could hear it but couldn't see me. O well. The water was a soft landing with just a skiff of ice.

They say a good ice bath is good for ya..
Lol

 

[Hedgerow]

I’ve gone through the ice before..

It’s a shocker... and amazing how fast it soaks through the clothes and fills the boots.

 

[Cat 525]

Noticed that also! Boots felt like they weighed 20 lbs.

 

[Hinerman]

Yes, you can get the suitcase for wire.

Wheeler metals had a certain company make them a proprietary brand they could sell..
Guy at wheeler said they had 150 of em in service around Sprinfield.

Wheeler Metals is headquartered here. I know them. Last time I was in their store they were Lincoln dealers (for a very long time).

You should see their place here!!!

 

[Hedgerow]

Wheeler Metals is headquartered here. I know them. Last time I was in their store they were Lincoln dealers (for a very long time).

You should see their place here!!!

Yup..
They sell Lincoln’s and anything a welder/fabricator would need..
They’re pushing the Bronco units now.
I guess all the brands are made in the same place..
This welder has the same Kohler as my wood mizer.
Old school with a manual choke. No EFI..

 

[Fishnuts2]

I learned this from a former Navy welder. Only two things that you can't weld.
A broken heart and the break of day.

 

[Semotony]

Well guys

I ended up in the creek today! Found out my gymnastic talent will let me somersault backwards into the drink! End of logging for the day! Left saw up on the bank still idling till my help got there to help yank me out. Ruined phone and pride I say!

Glad to hear no worse damage than that. I go in on purpose, spiritual communication while there, as much as possible. Benefit has been great. Just spend less time in this weather than July or August lol

 

[Hinerman]

Yup..
They sell Lincoln’s and anything a welder/fabricator would need..
They’re pushing the Bronco units now.
I guess all the brands are made in the same place..
This welder has the same Kohler as my wood mizer.
Old school with a manual choke. No EFI..

I need to come up and break stuff so you can give that Bronco a workout...

 

[67L36Driver]

I should have looked first but:

The alum transfer was horrible in the 066 cylinder so I just ordered a Metior P/C kit from Wolf Creek Saw shop.

Not much to do today so I started digging off the transfer with the end of a round file. Then used my small wheel cylinder hone but the shoes were too short and snagged the ports unless I was super careful.

Switched to my automotive glaze buster. It’s suitable for 4” bore.

Ended up with a serviceable OE Stihl cylinder. Only minor scratches.

I could have saved a Benjamin. [emoji90]

 

[67L36Driver]

I should have looked first but:

The alum transfer was horrible in the 066 cylinder so I just ordered a Metior P/C kit from Wolf Creek Saw shop.

Not much to do today so I started digging off the transfer with the end of a round file. Then used my small wheel cylinder hone but the shoes were too short and snagged the ports unless I was super careful.

Switched to my automotive glaze buster. It’s suitable for 4” bore.

Ended up with a serviceable OE Stihl cylinder. Only minor scratches.

I could have saved a Benjamin. [emoji90]

 

[Hedgerow]

I need to come up and break stuff so you can give that Bronco a workout...

 

[Hinerman]

View attachment 278654

^^^^thread killer

 

[Hinerman]

 

[Hedgerow]