how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[countryhog]

The Wright clutch just unscrews.

NOT!!!!

Clever how they spot welded that washer on there so one can’t set the key way.

. Arsewipes!

Hacksaw blade and file

 

[Workshop]

The ‘Workshop CAD trap’ runs.

The four crankcase bolts fell out on the first go round.[emoji15]

All that was holding the engine together was the Permatex #2.[emoji106]

Put ones seareated under the head for the second and used a cheater to tighten ‘em.

Stihl self tapping screws. Bleah!!
[emoji35]

I figured you needed a challenge, Carl.

 

[cobey]

If the guy set it up like that to keep from bending over that would be one thing.

And is that bar new?

It's in fair condition, it doesn't oil it enough. It hadn't been run long enough to hurt it much

 

[teacherman]

View attachment 92698

Oh this poor little 036 pro
I bet it's had a hard life

036 don't mean it needs a 36" bar the
Pawn shop gets all kinds of stuff.
He is in deep on it, but you all let me know if any of you want it

how much

 

[teacherman]

The Wright clutch just unscrews.

NOT!!!!

Clever how they spot welded that washer on there so one can’t see the key way.[emoji35]. Arsewipes!

Well, now isn't that just precious. Yeesh it sounds like the government.

 

[Hinerman]

If you want to, you can.
Just let me know when you do it, so I can check in on it and make sure nobody's writing checks my ass can't cash.

Already did. If you want me to put your address in the first post text it to me or PM me. If not, I understand.

http://opeforum.com/threads/hedgefest-gtg-2018-march-30-31-in-carthage-mo.9116/#post-528960

 

[67L36Driver]

I figured you needed a challenge, Carl.

Now the top cover don’t lock down.[emoji849]

Freakin homeowner Steals.[emoji90]

 

[67L36Driver]

Hacksaw blade and file

Yeah. It’s a woodruff key. It’s not like it could work its way out.[emoji35]

 

[cobey]

how much

He wants 370
I think he is high, the piston looks
Good, it's dirty. .... I hope he comes down

 

[Dub11]

Nah, Piltz would be running a 42" 3/8lp bar on an 036 for sure!

And 6" spikes to boot lol

It's in fair condition, it doesn't oil it enough. It hadn't been run long enough to hurt it much

Can probably mod it .

He wants 370
I think he is high, the piston looks
Good, it's dirty. .... I hope he comes down

I would say about $70 to high. But I'm cheap.

 

[WKEND LUMBERJAK]

Morning

 

[hoskvarna]

Morning fellars


Sent from Hoskvarna Hills

 

[Hinerman]

Good morning saw stooges. Have a fantastic day.

 

[67L36Driver]

Morning midlanders!

 

[countryhog]

Howya

 

[Douglas Ostrander]

It was a nice morning to stack wood. Just right. 52 degrees.

 

[Workshop]

Morning everybody.

 

[67L36Driver]

Table of contents:

Interesting, no?

IPL of your favorite old Remy/Mall available on request.[emoji16]

Not found on Chainsawer.

 

[teacherman]

And 6" spikes to boot lol

Can probably mod it .

I would say about $70 to high. But I'm cheap.

I'd say the same, and I know I spend too much.

 

[67L36Driver]

Hah! Got the top to latch in place.

I had to stand on it! [emoji6]

It’s going thru a heat cycle to relax the stress in the plastic now.