HOMELITE Homelite Thread

[hacskaroly]

Is a 500xl a desirable saw? If so one on eBay seems fairly cheap but kinda rough and probably scored.

Ouch on the shipping. Its a good looking saw, looks like a fun project.

 

[greystone mountain man]

What is a 500xl? never heard of one.

 

[LAWN BOY]

What is a 500xl? never heard of one.

It's actually an xl500. And they are basically an xl12/super xl with different cc rating and paint I think.

 

[pastryguyhawaii]

I wanted to put a sprocket nose bar on this saw. They handle the 3/8’s chain they come with fine but I had this .325 bar that fit. 9 pin sprocket works quite well. Sitting on the beginning of a wedding cake stand it was shaping.

 

[sawnami]

It's actually an xl500. And they are basically an xl12/super xl with different cc rating and paint I think.

Here's the difference between an XL-12 piston and an XL-500 piston

 

[heimannm]

Hey Steve, Open House here on the 28th & 29th.

Come and do some treasure hunting if you dare...



There are still an number of the older models and C Series saws in my garage...



Mark

 

[sawnami]

Hey Steve, Open House here on the 28th & 29th.

Come and do some treasure hunting if you dare...

View attachment 453484

There are still an number of the older models and C Series saws in my garage...

View attachment 453485

Mark

OH my! That sounds interesting!

 

[LAWN BOY]

Got my Homelite EZ running good today thanks to @Stump Shot for rebuilding the carburetor. Homelite 360 also got a rebuilt carb, but still pours fuel out the muffler like crazy and won't start.

 

[hacskaroly]

Homelite 360 also got a rebuilt carb, but still pours fuel out the muffler like crazy and won't start.

Is that with the saw in the "run" position, no choke? I wonder if you have a bent rod, I have had that issue when one gets bent and when in the correct position it inadvertently puts the choke on and floods.

 

[Stump Shot]

Got my Homelite EZ running good today thanks to @Stump Shot for rebuilding the carburetor. Homelite 360 also got a rebuilt carb, but still pours fuel out the muffler like crazy and won't start.

If you can't find anything else wrong, bring the carb back and I'll go through it again. Make sure you have GOOD spark first.

 

[LAWN BOY]

Is that with the saw in the "run" position, no choke? I wonder if you have a bent rod, I have had that issue when one gets bent and when in the correct position it inadvertently puts the choke on and floods.

I had the air filter off so I could see that the choke rod was functioning properly.

 

[sawnami]

Had a friend furnish me a parts saw a while back that gave me the incentive to put together a running 5-30.

 

[heimannm]

That is a good running saw. Hope I can sound that strong that when I reach 71...

Mark

 

[Jay Hansen]

What is a 500xl? never heard of one.

Picture of mine.

 

[hacskaroly]

Picture of mine.

I love the colors on those!