SELLING Homelite Super 1130G

[Woodslasher]

Up for sale is a Homelite Super 1130G. Not much backstory on this guy, my brother acquired it from a friend as a companion for his 1020 and has decided he no longer needs it. I put a carb kit in it about a year ago when he got it even though it was a runner since it has the single-jet SDC in it. It sounded a bit lean when I made a test cut with it so I only ran made 1 cut with it (it didn't sound bad, it just didn't 4-stroke out of the cut that I heard). Only bad thing with it is the muffler guard is cracked in half. All the pieces are present and it could be welded, but it is cracked in half and has a separate crack on the top. It'll come with two bars and chains, both the bars and chains are 0.63, one bar and two chains are .404 and both bars have the same driver count for the chains. The roller nose bar is kinda "fragile", the tip was stuck when I got it but it came loose with some oil and a few taps, I'd only use it for displays or a few cuts. The Windsor is what came with the saw, it appears to be in good working order. I have no clue on the price, how's $750 + the ride sound?

 

[Woodslasher]

 

[Woodslasher]

 

[Woodslasher]

 

[Woodslasher]

 

[Woodslasher]

 

[Bill G]

If I did not already have some I would be interested.

 

[nv656]

Tempting

 

[Woodslasher]

$650 + the ride

 

[Maintenance Chief]

I am highly tempted to get this saw! Maybe after the Holidays are over???
I don't think people realize what a beast this thing is!, the non gear drive version was my go to saw for huge stumps for years. It would just eat ! No wedges nessiary as it would just keep pulling .404!

 

[Bill G]

I know a wee about em.

Here is a video of an old Homelite XP1100 Gear Drive making chips at a GTG in Indiana circa 2009. The saw had 90psi compression and was running 1/2 chisel chain. It put out a decent pile of chips for what some call "old junk"

 

[Woodslasher]

Bump, $600 + the ride.

 

[Woodslasher]

$500 + the ride