Holiday Giving Thread

[RIDE-RED 350r]

Yeah, I'm starting to look at it that way my own self. Lol!

 

[Jon1212]

Yeah, I'm starting to look at it that way my own self. Lol!

Troof! I'm down to fourteen, hoping to get under twelve.

 

[Cracker Boy]

@jakethesnake i sent pm to you with my info i believe to talk with you and send you some of my custom made lures as a gift or trade for some of yours get with me brotha.hope you are doing well.

 

[BrokenSVT]

Troof! I'm down to fourteen, hoping to get under twelve.

I just started in May. If I'm counting correctly, I've purchased 38 since then. I believe I have 16 in the garage right now.

 

[XP_Slinger]

I’ve got an MS310 with B&C to put on the block. Has a new aftermarket top end and just needs a carb, fuel line and intake clamp to be a runner. I had this one given to me by a coworker and haven’t gotten around to getting it going, as simple as it would be to do. Please post in this thread if you would like to have it so things are on the level then shoot me a PM. If I have more than 5 PMs by 4pm on Sunday, 10 Dec there will be a drawing to chose the recipient. Less than 5 and it goes to the first responder. I would ask for the recipient to provide shipping funds. There, the tease was short lived @Jon1212 lol. This saws story can be found in the following thread : http://opeforum.com/threads/help-me-out-stihl-bros-ms310.7456/

 

[CJ Brown]

Wow that's very generous!

 

[XP_Slinger]

Jon1212 : NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
NOS Oregon D176 Echo bar. 16" 3/8 050
New Oregon Powermatch K095 16" 3/8 .058 60DL.

Sty57 : tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn bar 20 inch 3003 mount .325 .063

Matt Ellerbee : crasftman 1.9 top handle (non runner)

Drptrch : three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks : Raisman 16" (60 DL) 3/8 .050chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan : 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project

moparnut88 Pferd file handles - a couple sizes andmultiple available

T.Roller : Free slap fight and maybe a Mac 797

MKinslow Husqvarna 570XP cylinder, light transfer.

XP_Slinger 3/8, .058ga, 20", 72DL, K095 Mount bar
Stihl MS310

Acornhill Poulan 4000 starter pulley

huskihl 028. PM by 4pm Sunday 12/10

RIDE-RED 350r: 16" 3/8 56DL Low Profile A064mount with chain.

SOS Ridgerider: 5 bottles of Woodland Pro SyntheticOil.

 

[XP_Slinger]

Wow that's very generous!

Just one of those things man. I lost interest and it was given to me so why not pay it forward to someone that needs it.

 

[Chainganger]

Thanks everyone for jumping on the list update. It makes it easier to keep track of what has been claimed.

Merry Christmas, Happy Hanukkah, Happy Solstice, etc.

Happy Festivus!

 

[huskihl]

I’ve got an MS310 with B&C to put on the block. Has a new aftermarket top end and just needs a carb, fuel line and intake clamp to be a runner. I had this one given to me by a coworker and haven’t gotten around to getting it going, as simple as it would be to do. If I have more than 5 PMs by 0800 Saturday there will be a drawing to chose the recipient. Less than 5 and it goes to the first responder. I would ask for the recipient to provide shipping funds. There, the tease was short lived @Jon1212 lol. This saws story can be found in the following thread : http://opeforum.com/threads/help-me-out-stihl-bros-ms310.7456/
View attachment 99942 View attachment 99943 View attachment 99944 View attachment 99945

Nice saw. I had planned on gifting my 039 here, but I gave it to morewood at the TN gtg to replace the one he sent to Strapon and never got back.

 

[RIDE-RED 350r]

Happy Festivus!

For the restofus

 

[Cracker Boy]

Nice saw. I had planned on gifting my 039 here, but I gave it to morewood at the TN gtg to replace the one he sent to Strapon and never got back.

Lmao strapon

 

[Cracker Boy]

Happy Festivus!

You find your buck you shot.

 

[tickbitintn]

Left to right, top row then bottom.
Top
1. 5037256-01
2. Stihl 1125 8 .325
3. P0531-A7N
4. EC206-J7X with bearing
Second
5. McCulloch 86948
6. Stihl 3/8" 7t. Had "031" written on it
7. Oregon 10624 "new" some surface rust
8. 1110 017 flywheel

Claim one or all?
Shipping please!

First box I grabbed more to come....

Sent from my XT1635-01 using Tapatalk

 

[lwn9186]

I’ve got an MS310 with B&C to put on the block. Has a new aftermarket top end and just needs a carb, fuel line and intake clamp to be a runner. I had this one given to me by a coworker and haven’t gotten around to getting it going, as simple as it would be to do. Please post in this thread if you would like to have it so things are on the level then shoot me a PM. If I have more than 5 PMs by 0800 Saturday there will be a drawing to chose the recipient. Less than 5 and it goes to the first responder. I would ask for the recipient to provide shipping funds. There, the tease was short lived @Jon1212 lol. This saws story can be found in the following thread : http://opeforum.com/threads/help-me-out-stihl-bros-ms310.7456/
View attachment 99942 View attachment 99943 View attachment 99944 View attachment 99945

Put me in the mix please.

 

[XP_Slinger]

Put me in the mix please.

You’re in, thanks for coming back to Post in here. Keeps everyone in the loop

 

[Stihlsmoking]

I’ve got an MS310 with B&C to put on the block. Has a new aftermarket top end and just needs a carb, fuel line and intake clamp to be a runner. I had this one given to me by a coworker and haven’t gotten around to getting it going, as simple as it would be to do. Please post in this thread if you would like to have it so things are on the level then shoot me a PM. If I have more than 5 PMs by 0800 Saturday there will be a drawing to chose the recipient. Less than 5 and it goes to the first responder. I would ask for the recipient to provide shipping funds. There, the tease was short lived @Jon1212 lol. This saws story can be found in the following thread : http://opeforum.com/threads/help-me-out-stihl-bros-ms310.7456/
View attachment 99942 View attachment 99943 View attachment 99944 View attachment 99945

I like a shot at it also. I have a buddy that needs a good small saw. I'll fix and give to him. Thanks

 

[XP_Slinger]

I like a shot at it also. I have a buddy that needs a good small saw. I fix and give to him. Thanks

You’re in the hat, shoot me a PM titled “MS310” so I can keep track of all those interested. Good luck!

 

[Cracker Boy]

I like a shot at it also. I have a buddy that needs a good small saw. I'll fix and give to him. Thanks

Goood gesture bro.and good luck.

 

[Jon1212]

I’ve got an MS310 with B&C to put on the block. Has a new aftermarket top end and just needs a carb, fuel line and intake clamp to be a runner. I had this one given to me by a coworker and haven’t gotten around to getting it going, as simple as it would be to do. Please post in this thread if you would like to have it so things are on the level then shoot me a PM. If I have more than 5 PMs by 0800 Saturday there will be a drawing to chose the recipient. Less than 5 and it goes to the first responder. I would ask for the recipient to provide shipping funds. There, the tease was short lived @Jon1212 lol. This saws story can be found in the following thread : http://opeforum.com/threads/help-me-out-stihl-bros-ms310.7456/
View attachment 99942 View attachment 99943 View attachment 99944 View attachment 99945

Super cool!