heat gun

[Moparmyway]

I'm loose lipped.

A chain is only as good as the saw that pulls it.

I hope you nailed this saw, its gunna need lots of grunt

 

[jmssaws]

We need your gtg so us old timers can teach them youngens a lesson.

 

[huskihl]

While we're talking 066 mufflers, the one Jason helped me with still had the factory cover, and same outlet, but the cage was taken out. What works good on these for extra outlets? I'm a good welder

 

[Moparmyway]

While we're talking 066 mufflers, the one Jason helped me with still had the factory cover, and same outlet, but the cage was taken out. What works good on these for extra outlets? I'm a good welder

This one has the most power so far. It seems that the bigger you go with opening them, the more they like it. Especially if ported

 

[Deets066]

While we're talking 066 mufflers, the one Jason helped me with still had the factory cover, and same outlet, but the cage was taken out. What works good on these for extra outlets? I'm a good welder

Multiple openings with lots of area

 

[Moparmyway]

While we're talking 066 mufflers, the one Jason helped me with still had the factory cover, and same outlet, but the cage was taken out. What works good on these for extra outlets? I'm a good welder

Now that I read this post, I see it differently.
Sorry !
I have been using a custom made, stamped deflector on every muffler mod
I would highly reccomend you get in touch with @Red97 and PM him about his deflectors. Easy to trim to fit, and easy on the price too.

 

[angelo c]

We need your gtg so us old timers can teach them youngens a lesson.

Dang Jay,
If you're an "ol timer" then I must be "fossil fuel"....

 

[Keith Gandy]

Jason, dont buy anything.
I'll throw a new heat gun in a box with your chain. I have a few extra in storage under the bench and could use the room

Thats nice of u man! Congrats Jason

 

[Genius]

I will be anticipating the arrival of a wicked sharp chain.

For those that don't know kevin builds a damn fast chain,when I video a saw I try to only use a Moparmyway or mdavlee chain,I'm lucky to have them as friends.

Kevin is a good guy

He does build a bad ass chain. He sent one about a year ago, it was my first time running square. He made me a believer.

I sent it back a while back for a touch up and he made it moar better. I haven't had a chance to run it yet, it's so nice that it's going to be a GTG only chain.


I haven't had a chance to run one from Mike yet.

 

[mdavlee]

Kevin is a good guy

He does build a bad ass chain. He sent one about a year ago, it was my first time running square. He made me a believer.

I sent it back a while back for a touch up and he made it moar better. I haven't had a chance to run it yet, it's so nice that it's going to be a GTG only chain.


I haven't had a chance to run one from Mike yet.

You threw away the one in the box with the 288?











Just kidding.

 

[jmssaws]

My 36" he made me is unbelievable.

 

[Moparmyway]

I haven't had a chance to run one from Mike yet.

Well ............. just make sure that you run mine first, then.
Cause if you run Mikes first, you're gunna be disappointed with mine

 

[Moparmyway]

My 36" he made me is unbelievable.

I like that .404 loop even more than that .375 one

I kept it out of the dirt and went 12 tanks in fresh hard maple, before I wanted to sharpen it, it was still cutting pretty good. I sharpened it and sent it to you.

 

[Mastermind]

I wish I had a sharp chain.

 

[Moparmyway]

I wish I had a sharp chain.

Jon too busy to help in that dept ?
I heard that his chains are pretty strong

 

[mdavlee]

I wish I had a sharp chain.

Talk nice to Jon and maybe he'll make you one on the other side of your shop[emoji1]

 

[Genius]

You threw away the one in the box with the 288?











Just kidding.

Once I get time to finish the 288 I may have to send it to Zoo City and then get a chain from you.

7910 vs 288 with both of your chain.

 

[Genius]

Good ole OPE fashion.

Go from heat gun talk to chains

 

[jmssaws]

The 404 chain is very sharp. Takes a strong saw to turn it.

 

[Mastermind]

We dismantled our Simington.......it's time to put it back together.