Fundraiser for family of Stevetheboatguy

[Johnmn]

Okay it sounds like the consensus is to extend the raffle until the 30th. I am fine with that but I will be unavailable the 29th, 30th and the 1st so I will need that first week of October to get caught up and organized to do be able to start the drawing that first weekend in October.

Just to clarify the raffle is extended until September 30th so continue with raffle items and/or changes as well as donations to the GFM. Please continue to pm me if/when you donate, also check the list of names a few pages back if you already donated but didn’t leave a comment or let me know.

Steve’s dad Tim text me last night and they are very grateful for everyone on this forum.

 

[Crocky28]

Cool, well I’d like to change my prize donation to help get this over the line. I will be offering a New Echo CS2511tesc, ported. Comes with the 10” 1/4 carving bar. Can have the side covers dyed like in the pic or stock. Winners preference. Shipping covered. I have the saw there it just needs ported and dyed.

 

[Crocky28]

It’ll cut like this.

 

[Crocky28]

This also saves anyone having to ship a saw to me as I know this can be a bit of a pain.

 

[timg]

OK, Cool#2 then and thanks @Johnmn for the extension. Prize added to the list:
Made right here in western Pa. and with the help of @Duke Thieroff at www.sawsalvage.com
Wooden crafted saw box and leather sheath. Brand new and will include shipping to the lower 48 states. Out of country will need some help with shipping. Sorry but the saw/Johnny Red IS NOT INCLUDED!! Saw is display only OK. Great for display of that special saw of yours.

 

[Duane(Pa)]

Couple nice prizes! Let'r rip tater chip!!!

 

[Sawdust Man]

@Johnmn
When you have time, please add this to the prize list.
Nos Oregon power match plus 18" .325 .050 k095 mount, includes a used once Carlton semi chisel chain.
I'll cover shipping to the lower 48.
Will gladly ship elsewhere at winners expense.

 

[Mastermind]

Great job everyone.

 

[farminkarman]

I will get the new prizes added to the list when I can get on a puter…sucks trying to do it from a phone.

 

[farminkarman]

Alright... the list is updated. Thanks to all for the donations!

 

[Duane(Pa)]

As @Johnmn said, I will be keeping track of donation items in this post. I will do my best to keep it up-to-date.
1. Husky 257/262 ported by @farminkarman
2. Husky 262 ported by @drf256
3. Woodsport job on any good running saw by @huskihl
4. Stihl ms460 from @redline4 ported by @Stump Shot
5. Dolmar 5100s from @stihl livin
6. Jonsered 670 from @Johnmn
7. Dolmar 6100 from @FederalQ
8. 24” Lightweight Tsumura bar Stihl or Husky from @MG2186
9. Hand forged pickaroon with handle from @NateSaw
10. 2 new off-the-roll 72EXL chains (3/8 x 0.050") up to 84 drive links from @Loony661
11. New Stihl ms400 ported by @Mastermind with 28" ES light bar.
12. Single bit axe by @Cat 525
13. Woodland Pro Fallers axe from @calcutta250
14. 3 new Oregon 28" exj 3/8-058-92dl chains from @bradb123
15. 2 Husqvarna x-cut chains 3/8-050-84dl from @bradb123
16. Dolmar 111 from @Powerstroke Cowboy shipped to the lower 48. *Saw can remain stock, or be ported by @Powerstroke Cowboy…winner’s choice
17. Brand new Milwaukee M12 Fuel 1/4” ratchet with accessories from @USMC615
18. Stihl MS250 from @Squareground3691
19. 3120xp carb from @mrxlh
20. Treemonkey 359 from @davidwyby
21. Double bit axe from @pbillyi69
22. NOS GB pro top bar and a loop of NOS Windsor chain D009 mount 3/8,.058-72DL from @jk14
23. New MS441CM MMWS and includes a new 24" Tsumura lightweight bar from @Joe Kidd
24. 2 Oregon CL square ground chains 3/8" x 0.050" up to 84dl from @PA Dan
25. 20" K095 3/8" x 0.050" Sugihara bar & two chains from @I saw a lot
26. New Echo CS2511tesc, ported. Comes with the 10” 1/4 carving bar. Can have the side covers dyed like in the pic or stock. Winners preference. Shipping covered. From @Crocky28
27. WCS 462/500i clutch cover from @Greg Newman
28. Stihl 20" ES light bar from @Matt Schmitt
29. Stihl 034, All (wear) parts r new. Saw got ported by @JohnnyBlade TA, MM, BGD, no machining on this one. Comes with 18" total super bar in good condition, and 2 chains from @JohnnyBlade shipping paid by winner.
30. Rattler ported 254xp. Comes with an 18" bar and a real good lpx chain from @JohnnyBlade shipping paid by winner.
31. Sandvik 20” 3003 Stihl mount 3/8 .063 and new Stihl RS36 chain from @AlfA01
32. 20” Stihl ES Light new in the package. Also 3/8” .063 New Stihl RS36 chain also included. from @AlfA01
33. 2 loops of Oregon 72CL chain (.050” square grind full comp) dl count 105 max shipping included from @mrxlh
34. Wooden crafted saw box and leather sheath. Brand new and will include shipping to the lower 48 states. from @timg
35. Nos Oregon power match plus 18" .325 .050 k095 mount, includes a used once Carlton semi chisel chain. Shipping to the lower 48 covered from @Sawdust Man

List

 

[Squareground3691]

List

That’s a great list , everyone involved should be proud of it , and shows what kind of community it is when it matters,

 

[Crocky28]

Bump

Rang it last night.

 

[Wonkydonkey]

I managed to do it again

 

[Wilhelm]

View attachment 390562
I managed to do it again

Your doctor may give You meds to do it more often!

 

[Eakf]

I've been out of out of pocket for a while. It saddens me to hear of the loss of Steve, but at the same time warms my heart that yall have rallied in support of others. (Again)

It's not much, but I'd like to add 2x loops of 63pm45 NIB shipped the the lower 48 to the prize pool if someone has a use.

 

[Johnmn]

Here is a list of names of people that donated and haven’t contacted me. I fully realize some or all may not even be members but maybe one or two are.

Daniel P.
Adam J.
Robert C.
Zachary M.
Rudy R.
Richard A.
Timothy W.
Bryce M.
Steve C.
Luke S.
Andrew H.
Gary L.
Doug H.
Robert A.
William G.
Gary P.
Adam B.
Frank C.
Tom A.
Ted G.
Charles U.
Scott B.
Pedro G.
Steve J.
Rob V.
John A.
Mike G.
Hiro K.
Lance H.
Joel S.
Scott S.
Michael S.
William H.
Thomas L.
Another Daniel P.

Jason M.

 

[Stump Shot]

Happy to report that the MS460 that @redline4 donated. is all done and ready to go to its new home.
As best I could ascertain Ed did a good job building the saw as I could find no faults and did not have to make any repairs.
Other than porting the only thing I added to the saw was new badges and a new front cover for the muffler with the extra outlet.
I kept the muffler base as Ed had already made a nice modification on the original outlet, ample enough that I did not add a third outlet like I sometimes do. This I thought would help keep the integrity of the original build intact as well.
Otherwise, it starts right up, runs and cuts great, was a fun project to do and I was glad to have a hand in it and on it.
Thanks to @redline4 for giving me the opportunity to help with your generous donation for this worthy cause and may God bless STBG's family.

 

[redline4]

Happy to report that the MS460 that @redline4 donated. is all done and ready to go to its new home.
As best I could ascertain Ed did a good job building the saw as I could find no faults and did not have to make any repairs.
Other than porting the only thing I added to the saw was new badges and a new front cover for the muffler with the extra outlet.
I kept the muffler base as Ed had already made a nice modification on the original outlet, ample enough that I did not add a third outlet like I sometimes do. This I thought would help keep the integrity of the original build intact as well.
Otherwise, it starts right up, runs and cuts great, was a fun project to do and I was glad to have a hand in it and on it.
Thanks to @redline4 for giving me the opportunity to help with your generous donation for this worthy cause and may God bless STBG's family.

Looks good Steve!
Thanks for putting badges on it, that will make it look nicer for sure.
I bet Brad had to go wash the icky Stihl germs off his hands immediately after the vid!

 

[Stump Shot]

Looks good Steve!
Thanks for putting badges on it, that will make it look nicer for sure.
I bet Brad had to go wash the icky Stihl germs off his hands immediately after the vid!

I'll leave the B&C on it so you can give it a go on Saturday when you're up.