Echo 501P. Let's play!

[Miller Mod Saws]

I don't know if I'd do much more to the saw. Runs real nice rpm under load and will gain more as the saw frees up. just run the piss put of it. document your work and save that info for more builds youl have happy customers

I will run the piss out of it. But for stopping there that's not gonna happen. Lol. As soon as I get a saw sold I will order another one and continue. This saw while it is a nice little saw still isn't even close to the same league as my 5105.

 

[Miller Mod Saws]

20 inch?

18" 325 lpx.

 

[Miller Mod Saws]

@WSE15 is there a chance they make a factory mesh filter for these? Instead of the felt

 

[Miller Mod Saws]

Wow. Ok. Nice job with the build. You happy with the results? Anything left in it?

It's ok so far. There should be a good bit left in it. It's not broke in so I hate to jump to conclusion but I don't think it's up to where I had the 500p yet. And I have yet to touch the transfers.

 

[RI Chevy]

Cool! Keep at it, I am sure you will find it. Great job so far.

 

[Miller Mod Saws]

Not gonna lie. This saw is my target. And this saw has gotten stronger since this vid. This saw is running a 3/8 20" bar. And it's running more rpm and has way more torque than what I have the 501P at know. But the 501p is noticeably lighter. But I do know the 501p will gain some torque as it breaks in. Max rpm dosnt usually seem to vary much but the torque does.

 

[RI Chevy]

Whew. Nice 5105! Really zippin.

 

[CapitaineHaddoc]

Wow! Looks like a 346 killer, great job with the dolly!

 

[WKEND LUMBERJAK]

Carl builds a strong 5105. Probably the strongest 50cc out there. The one I have will run a20" 3/8 buried tacked it at 13800 I the cut it was cutting in that sweet spot.and you can lean on it and keepsright on. And those that know me I can lean on a saw . Best money I've spent on a saw. Crap this thread is about echoes

 

[Miller Mod Saws]

Carl builds a strong 5105. Probably the strongest 50cc out there. The one I have will run a20" 3/8 buried tacked it at 13800 I the cut it was cutting in that sweet spot.and you can lean on it and keepsright on. And those that know me I can lean on a saw . Best money I've spent on a saw. Crap this thread is about echoes

Morning Kenneth!

 

[RI Chevy]

@wkend lumberjack

Post up a video in the saw video thread. We love videos and pics.

 

[Miller Mod Saws]

@wkend lumberjack

Post up a video in the saw video thread. We love videos and pics.

This is @Hedgerow running Kenneth's saw still new here and not broke in. And only running a 325x18 bar.

 

[Hedgerow]

That was a dandy 5105..

 

[Miller Mod Saws]

Well this will interest some of you. I of course took the vid last night. Just got home and thought let's see what that baby's running for comp now. Ya that's just after setting the squish. The squish band has not been touched in this saw. I'll check it again after some more run time. But sweet.

 

[WSE15]

@WSE15 is there a chance they make a factory mesh filter for these? Instead of the felt

Nothing on the IPL yet.

 

[Miller Mod Saws]

Ok I know I told you guys I was gonna wait till I get another saw. But I'm impatient sometimes. Lol. I went ahead and just squared the base of the intake up a little and raised the trans. Went 110/130 mains-134 secondaries/79

 

[Miller Mod Saws]

Just the the 500p the secondaries are a pita on this saw. Lol

 

[Dub11]

Well this will interest some of you. I of course took the vid last night. Just got home and thought let's see what that baby's running for comp now. Ya that's just after setting the squish. The squish band has not been touched in this saw. I'll check it again after some more run time. But sweet. View attachment 40463

Dam near run that on diesel lol

 

[RI Chevy]

Compression combustion firing. Get rid of the plug. Lol

 

[Miller Mod Saws]

I wanna make a few notes on this saw just in case the echo engineers read this. I haven't ran this saw much at all and the air filter was filthy. That said here's and improvement I think can be made.