(Dead build) 242 stuffers

[AlexStromberg]

Fits very nice. Have not found any info on the internet of anyone trying to use stuffers on this saw so thought i would share this. Stuffers are from a 535RXTView attachment 355389

 

[quattro.pilot]

interesting.....

 

[CJ Brown]

Fits very nice. Have not found any info on the internet of anyone trying to use stuffers on this saw so thought i would share this.View attachment 355389

Is there enough room inside the crankcase to clear those stuffers?

 

[cuinrearview]

Subbed.

 

[AlexStromberg]

Is there enough room inside the crankcase to clear those stuffers?

According to the micrometer they clear, when i get the case gasket i will post a picture of it together

 

[Bjorn]

Fits very nice. Have not found any info on the internet of anyone trying to use stuffers on this saw so thought i would share this.View attachment 355389

Nice work my friend.

 

[wcorey]

Gonna be tough to hear the four stroking at 17k rpm...

 

[AlexStromberg]

Gonna be tough to hear the four stroking at 17k rpm...

Hopefully it will turn that fast

 

[AlexStromberg]

After some test fitting they do not clear the cases but it is very very close. So i will make them fit by sanding of the paint in cases (it was ready to flake of anyways)

And remove the small tabs in the stuffers, they make the O.D a hair bigger. Will find some way to make them stay on the lobes. Maybe JB weld.

 

[AlexStromberg]

Update on the cylinder. Started to some very mild blending of the lowers The cheapo dremel clone isnt the best so wont try anything too risky before getting a better one.

First cylinder im running a grinder on so not going full hotsaw yet.

 

[ZukiRyder440]

Bumpity bump…You made more progress on this thing yet or what??. lol. Looks like a fun project for sure.

 

[AlexStromberg]

Bumpity bump…You made more progress on this thing yet or what??. lol. Looks like a fun project for sure.

Did a update yesterday? But going to make the stuffers fit today. Not in a hurry because im waiting on a lot of parts.

 

[AlexStromberg]

First test fit. Almost perfect. Other side needs some more adjustments. Also need to order some JB weld, doesnt exist in stores here

https://youtube.com/shorts/JjG3UOXnw7Y?feature=share

 

[ZukiRyder440]

First test fit. Almost perfect. Other side needs some more adjustments. Also need to order some JB weld, doesnt exist in stores here

https://youtube.com/shorts/JjG3UOXnw7Y?feature=share

Sweet! Keep em comin!!!

 

[AlexStromberg]

Test fitting with both cases. Almost spins freely. Need some more adjustment.

Very fun to make work though. Hopefully my work will pay off.

 

[Bjorn]

Here is a perplexing problem with saw cranks, the counterweights I'm guessing are about 1/3 of a circle so lower crankcase compression ratio. But take the piston and cylinder off your saw and turn the crank to BDC so it's at the bottom of the downstroke- when the transfer ports are open... Now look at the crank,it's counterweights are at the top of the crankcase and a large part of your fuel/air charge(about 2/3 of the crankcase volume) is trapped in the bottom of the crankcase with the counterweights above blocking your fuel charge from getting up past them to the transfer ports,considering the short amount of time the transfers are open.
By adding stuffers it will make much better flow, and no blocking of fuel charge.

 

[CJ Brown]

I'm really looking forward to seeing the final results of your experiment - both the fitment of the stuffers and the affect they have on the performance of the saw!

 

[AlexStromberg]

Project delayed due to the shipping company have "delivered" my package but it is anywhere but my mailbox... Ordered it last tursday too so was hyped for it.

The case gasket was in that package.

 

[AlexStromberg]

This is how tight they are to the cases. I try to remove as little as possible. Taking a long time but rather that than destroy a good set of cases.

More or less just removing what Husqvarna left from the casting process.

 

[CJ Brown]

Looks really good! What are you using to enlarge the case pocket? How much clearance do you think you need between the stuffers and the case?