Bonez
Well-Known OPE Member
- Local time
- 10:38 AM
- User ID
- 23899
- Joined
- Jun 26, 2022
- Messages
- 31
- Reaction score
- 73
- Location
- Missouri

I recently traded a big generator for a couple ATVs, I got the small one all good to go as Ive done them before and parts are a dime a dozen on amazon (super cheap to rebuild)
Now my issue comes with the big one. The 1999 Arctic Cat 250 2x4 is pretty much obsolete and found a few rare needed parts on ebay luckily but having a hard time sourcing a front handbrake switch? Just wondered if anyone knew of a parts site to check and links would be greatly appreciated !
So far Ive tore it down since the wiring was butchered, still waiting on the ignition switch to arrive so I can trace the lighting down and repair, other than that I got it running at the least. I also dont like red so I painted it a nice earth tone for the outdoors. Rebuilt the shocks as the rubber grommets were gone, pretty solid machine so far.
Now my issue comes with the big one. The 1999 Arctic Cat 250 2x4 is pretty much obsolete and found a few rare needed parts on ebay luckily but having a hard time sourcing a front handbrake switch? Just wondered if anyone knew of a parts site to check and links would be greatly appreciated !
So far Ive tore it down since the wiring was butchered, still waiting on the ignition switch to arrive so I can trace the lighting down and repair, other than that I got it running at the least. I also dont like red so I painted it a nice earth tone for the outdoors. Rebuilt the shocks as the rubber grommets were gone, pretty solid machine so far.
Attachments
-
da37cdc8-5804-4062-83d1-6b99c5cbb5c1.jpg188.4 KB · Views: 5
-
720aefc1-274a-4997-a2a3-a3e8574cdc9f.jpg195.8 KB · Views: 5
-
d9bd66b8-8e14-4d7e-9c7e-1d594ec062f9.jpg199 KB · Views: 5
-
fe8379d1-953f-4829-bbbf-c4577984bd5c.jpg125.6 KB · Views: 5
-
b44e3317-034f-457f-a625-ef1be50819c5.jpg208.4 KB · Views: 5