Anybody run a 462 head to head with a 7910?

[chipper1]

what is a 373, if I may ask?

Stroked 372, or is it a 365 .

It's a 372 that got typed out by a guy with fingers twice the size of the buttons. My bad.

Steven

What in the dumbfuckery is going on in here?

If you don't know I aint telling .

 

[Dub11]

Stroked 372, or is it a 365 .



If you don't know I aint telling .

I wasn't even gonna try.

 

[AlfA01]

Wonder if he maybe has a 362 or 461. There's only a few 462's in the US as of right now. They aren't available here yet

I can personally vouch for about seven 462's shipped stateside.

 

[AlfA01]

My curiosity is between the 462C and the 462 right now. A non-MTron is showing up at my crib today/tomorrow.

 

[Dub11]

My curiosity is between the 462C and the 462 right now. A non-MTron is showing up at my crib today/tomorrow.

Will it have a limited coil?

 

[Deets066]

Will it have a limited coil?

Most likely, the 461 was limited

 

[Marshy]

Maybe in few years I can start adding a couple more properly ported saws to my collection. Not in the budget for right now. The 372 that walkers did and the 2159 that t4driller (Mike) did are awesome. Wouldn't mind having a few more like them around.


Steven

Video of the Walkerized 372?

 

[AlfA01]

Will it have a limited coil?

Curious to find out...

 

[AlfA01]

She made it....surprising how little difference there is between the two.

I'll make a thread with pics comparing/contrasting the two since I have both at the moment...

 

[RI Chevy]

Most likely, the 461 was limited

Will it have a limited coil?

As long as it is limited to 18000 it should be ok. lol

 

[Stevetheboatguy]

Video of the Walkerized 372?

I don't have the ability to take and load videos, but my little brother does. I'll have him get one the next time we are out cutting. I'm planning on running it, my 7910 and my 385. Have a bunch of hickory that needs slabbed and quartered.


Steven

 

[Marshy]

I don't have the ability to take and load videos, but my little brother does. I'll have him get one the next time we are out cutting. I'm planning on running it, my 7910 and my 385. Have a bunch of hickory that needs slabbed and quartered.


Steven

How do you like it? I watch Buckin Billy Ray on YouTube on occasion and his 372 runs top notch.

 

[huskyboy]

I don't have the ability to take and load videos, but my little brother does. I'll have him get one the next time we are out cutting. I'm planning on running it, my 7910 and my 385. Have a bunch of hickory that needs slabbed and quartered.


Steven

If your cutting big stuff the 385/390 will walk away from the other two

 

[Stevetheboatguy]

How do you like it? I watch Buckin Billy Ray on YouTube on occasion and his 372 runs top notch.

Honestly it's one of my favorites to run. Might be a bit stronger than my 7910, but I've never ran them both in the same day. I usually only run the 372 when it's really cold out. It's a xpg and I'm a wuss I love the heated handles. That could be why it feels stronger, the whole cold air density thing.

If your cutting big stuff the 385/390 will walk away from the other two

Yeah man a 32-36" bar is easy work for a 385/390. But the other two probably won't be far behind. I actually think the 372 will be neck and neck. It holds higher r's in the cut, but doesn't like to be leaned on quite as hard as the 385 and 7910.

I'll be done at the boat shop in a few weeks. Once that happens I'm going to line them all up and see where they fall in line. Hopefully Al can provide this rumored 462 he has been bragging about. And I can add that one in for my own comparison. All the saws but the 372 are bone stock. So that should work well for a real world comparison.


Steven

 

[Dub11]

If your cutting big stuff the 385/390 will walk away from the other two

Pics of walking saw.

 

[tree monkey]

I hate when my saw walks of the job

 

[huskyboy]

If a ported 372 can’t outrun a stock 7910 something is wrong with it.

 

[chipper1]

If a ported 372 can’t outrun a stock 7910 something is wrong with it.

Walkerized isn't ported from what I know.

 

[chipper1]

I hate when my saw walks of the job

Had that happen with a 2153, sad day, still hope to find it.

 

[Stevetheboatguy]

Walkerized isn't ported from what I know.

I've heard both ways on that. I bought this one second hand so....... It has been through walkers shop, but if it is their porting I can't confirm with 100% accuracy. But whoever put the recipe together did a good job and I'm impressed.


Steven