Any 67DL .325 K095 bars out there?

[Ryan Browne]

As a result of some horse trading with a couple of members I have a bunch of 67 dl loops of .325 .063 chain. I'd love to run that setup on my Husky 350/346, but I'm only seeing 66 DL bars in that mount/pitch. Any options I'm not seeing? It'd be great to be able to swap chains around between my the Husky and my 261.

Thanks!

 

[GCJenks204]

Does anyone make an adapter from D025 to K095?

@Homelite410 ?

 

[Dub11]

Have you tried mounting them up? Or buy an 18" bar and cut it down.

 

[cobey]

Small husky is alot different than a
Regular stihl mount.
Oil hole is a long way off

 

[GCJenks204]

What about a larger sprocket on the Husky? Would that add enough to need another link for the same bar?

 

[Dub11]

I'm also wondering if there is a KO95 that is .063 out there? I've never have looked.

 

[cobey]

What about a larger sprocket on the Husky? Would that add enough to need another link for the same bar?

I think Its the .063 gauge thats
The problem

 

[cobey]

I just did a couple searches
And couldn't find a k095
In .063 gauge there are some large
Mount bars in 63 but they were
Long bars for big saws

 

[GCJenks204]

I'd love to run that setup on my Husky 350/346, but I'm only seeing 66 DL bars in that mount/pitch. Any options I'm not seeing?

I think Its the .063 gauge thats
The problem

The way I read Ryan's post is he can find a 66DL K095 in .325/ .063. The chains he has are 67dl to fit his 261. I think the 1dl difference between a standard Husky set up vs Stihl is the issue.

 

[cobey]

A while back matt had a killer race
Chain he built, but it was .063 67
It was on a 3 cube stihl, he ended up running it on a worn out. 058 husky
K095 but he couldn't find a .063 gauge
Bar to use it on. If you could get someone
To widen the slot on a .058 you would
Be good. But that would be alot harder than it sounds

 

[cobey]

You could check with @srcarr52

 

[cobey]

Taking away .005 off the inside of bar rail
Would be hard it would be .0025
A side.

 

[cobey]

Well

The way I read Ryan's post is he can find a 66DL K095 in .325/ .063. The chains he has are 67dl to fit his 261. I think the 1dl difference between a standard Husky set up vs Stihl is the issue.

I guess I missed that, but I couldn't find
Any k095 bars in .063
You are right about the bigger sprocket
One driver is not too hard to deal with

 

[Ryan Browne]

Gary, good call on the drive sprocket. That saw would be perfect with an 8 tooth anyway.

Thanks cobey for pointing out the gauge problem. I guess I hadn't made it that far. It seems you're right.

So, what about a small mount stihl bar on the 350? Anyone try that yet? I wonder how easy it would be to fit up. I haven't checked, but hopefully they're available in .325 .063, 66-67.

 

[concretegrazer]

It's not to hard.

 

[fordf150]

use mikes echo bar adapter and modify the bar to oil, problem solved.

 

[ajschainsaws]

Can get these pair of bars over here
1st one is stihl Do25 mount


The 2nd one is K095 mount

 

[OldJack]

This might be what you want.

http://leftcoastsupplies.com/product/16-gb-pro-top-bar-325-063/

 

[Ryan Browne]

This might be what you want.

http://leftcoastsupplies.com/product/16-gb-pro-top-bar-325-063/

That but in k095.

 

[Ryan Browne]

use mikes echo bar adapter and modify the bar to oil, problem solved.

Tell me more would you Nate? Where do I find this adapter? Will it allow me to run a d025 bar on a k095 saw?