440/460 Hybrid question

[Miller Mod Saws]

@Keith Gandy you need in on this conversation. Lol

 

[mdavlee]

Must be. I like it on the insides as well on some cylinders.

 

[Keith Gandy]

@Keith Gandy you need in on this conversation. Lol

Jus readin along fellers

 

[Keith Gandy]

My hybrid is a really good runnin saw . 044 bottom , new oem topend, 100/117/80 but I would take a 064 over it. Id probably sell mine to get a AWOL 562XP

 

[juttree]

@juttree when you are porting the intake on the 046 jug there is a small "bump" inside the intake runner. Be careful when grinding on that spot. The material is very thin and you can easily make a hole.
I found out the hard way. I fixed my screw up with a bit of JB weld.View attachment 21091View attachment 21092

For some reason I'm not getting notifications so I need to keep checking.
Thanks for the heads up. I've done a few 460's but maybe I'm not going far enough. I think i'll push on the bit a little more, I want to try some of that magic jb weld.

 

[jmssaws]

My hybrid is a really good runnin saw . 044 bottom , new oem topend, 100/117/80 but I would take a 064 over it. Id probably sell mine to get a AWOL 562XPView attachment 21099View attachment 21101

How much?

 

[juttree]

It probably helps if I check the box that says that I want to receive notifications, all fixed now.

 

[jmssaws]

My 460 is the strongest one I've done and I ground through it also. Easy to do on them,it's a popup 064 piston.
100 115 80 runs very good

 

[Keith Gandy]

My 460 is the strongest one I've done and I ground through it also. Easy to do on them,it's a popup 064 piston.
100 115 80 runs very good

Been workin on one of your favorites tonight!

 

[Canadian farm boy]

I couldn't let Keith be the only guy showing off his hybrid. Here's mine

 

[Keith Gandy]

I couldn't let Keith be the only guy showing off his hybrid. Here's mineView attachment 21141View attachment 21142

Very nice man!!