species8472
Pinnacle OPE Member
- Local time
- 3:32 AM
- User ID
- 773
- Joined
- Feb 5, 2016
- Messages
- 346
- Reaction score
- 1,469
- Location
- Smithton Tas Australia
Can anyone get hold of 404 high tooth chain.
404 @ 0.050 is tough to pull cross cut.he said rakers were something like .045-.050 from factory
yeah, this was ground back about halfway. still about .040 i guess. this saw pulled it with ease.404 @ 0.050 is tough to pull cross cut.
Never checked the angles with 404. Fifty might not be enough buy the end of cutter life. My chains are still over half cutteryeah, this was ground back about halfway. still about .040 i guess. this saw pulled it with ease.
so far I have been chasing a couple of rolls across three continents and 8 countries, but I haven't given up
I have standing orders for about a roll and a half worth and plenty of guys interested in a loop when i track it down and have it in hand
Dave
By the time you get the cutter the way you want it, I’m sure they’d be fine. Espeacially on a big saw