.325 square ground

[Icepick69]

Here's the chain. A used resharpend square. From round to square. First time sharpened. Second time mite be better

 

[Icepick69]

Yes. I have big dawgs on that saw. That's my wife's saw. So the comments will need to be towards her. So please don't comment on them. She isn't on here

 

[Icepick69]

This story is gonna get better. I can't believe I used my whole afternoon doing my own stuff. But it's ok

 

[Icepick69]

 

[Icepick69]

Here's the log. Oak

 

[Icepick69]

 

[Icepick69]

 

[Icepick69]

I'm using a 18" bar. With big dawgs. So I can't get all the way thru it. The tip will be buried in the cut

 

[Icepick69]

Chain. Used stihl 26rs, worn, first recut to square.
Saw, Husqvarna 346xp. Used.
Bar. Cannon super mini. Csm-c1-18-50-2. Regrooved to .063 with stainless harvester rivets . Installed with press.photos of that later. You can see in pictures how they stick out some.
Fuel. Non e.

 

[Icepick69]

Here's the video. It's not a race saw. I cut firewood.
The log is solid oak. Been sitting for awhile. I use it for tuning ( chains )

 

[Icepick69]

Says my video does not have accepted extension.
Help

 

[Icepick69]

iPhone 6s.

 

[Magic_Man]

You must upload them to YouTube or similar first then link to here.

 

[Icepick69]

What's your number

 

[Icepick69]

two cuts in the video

 

[Definitive Dave]

Or to YouTube which seems to be faster with better resolution at least for bigger files

 

[Magic_Man]

Videos will be coming shortly.

 

[Magic_Man]

 

[Icepick69]

Thank you again for the video help.

There is two cuts in the above video

 

[Icepick69]

So,
The story continues. Here are the pictures of the bar, before and after regrooved. Minimal scratches after. And the groove after. I tried hard.
Also pictures of the tip I was talking about. Please understand, I would never send one out that way. I was just needing to get it ready. Just glad I had the equipment to get everything ready.