066 bloody

[livemusic]

I saw a pic of a 'bloody 066' saw. Its color scheme was white with red blood splats, lol. Is this a mod or does somebody sell these? What's the scoop? Is that a reference to a chainsaw movie?

 

[Stump Shot]

@Definitive Dave

 

[Definitive Dave]

I built that saw with help from some friends to run in the mastermind gtg build off two years ago. The custom paint and graphics were done by a local shop as an homage to the gang in Kill Bill 2 that Lucy Liu runs, she cuts off a guys head for disparaging her Chinese heritage so it seemed appropriate for the Chinese kit build-off. It is a strong saw with a ported Big Bore cylinder and 210+ psi and is set up for small bar racing

 

[livemusic]

I built that saw with help from some friends to run in the mastermind gtg build off two years ago. The custom paint and graphics were done by a local shop as an homage to the gang in Kill Bill 2 that Lucy Liu runs, she cuts off a guys head for disparaging her Chinese heritage so it seemed appropriate for the Chinese kit build-off. It is a strong saw with a ported Big Bore cylinder and 210+ psi and is set up for small bar racing

It is certainly catchy!

 

[Czed]

I built that saw with help from some friends to run in the mastermind gtg build off two years ago. The custom paint and graphics were done by a local shop as an homage to the gang in Kill Bill 2 that Lucy Liu runs, she cuts off a guys head for disparaging her Chinese heritage so it seemed appropriate for the Chinese kit build-off. It is a strong saw with a ported Big Bore cylinder and 210+ psi and is set up for small bar racing

Also built without a choke apparently.

 

[Definitive Dave]

Indeed, i later removed the choke and added a D handle and husky decomp

 

[jakethesnake]

Indeed, i later removed the choke and added a D handle and husky decomp

Pics?

 

[Czed]

Pics?

@Evansaw

 

[Definitive Dave]

Before the choke delete

 

[Evansaw]

@Evansaw

 

[Evansaw]

@Evansaw

 

[Stump Shot]

 

[AlfA01]

I built that saw with help from some friends to run in the mastermind gtg build off two years ago. The custom paint and graphics were done by a local shop as an homage to the gang in Kill Bill 2 that Lucy Liu runs, she cuts off a guys head for disparaging her Chinese heritage so it seemed appropriate for the Chinese kit build-off. It is a strong saw with a ported Big Bore cylinder and 210+ psi and is set up for small bar racing

Any data on the paint type, Dave? Was it auto paint? I got a 440 here that's uglier than a rental pig's backside.

 

[Czed]

Any data on the paint type, Dave? Was it auto paint? I got a 440 here that's uglier than a rental pig's backside.

Does it have a choke?

 

[Definitive Dave]

https://www.facebook.com/614coatings/

performance powdercoating locally did the paint, hydrodipping and powdercoating

 

[AlfA01]

https://www.facebook.com/614coatings/

performance powdercoating locally did the paint, hydrodipping and powdercoating

The powder I can do and have plenty left over from my 660 build. Painting the plastic is where I'm coming up short...

 

[jacob j.]

View attachment 195965

Is that Dave and John Reilly at the Tennessee GTG?

 

[AlfA01]

https://www.facebook.com/614coatings/

performance powdercoating locally did the paint, hydrodipping and powdercoating

That's spiffy work, but I was hoping for a DIY sort of solution.

 

[Definitive Dave]

If i remember right he stripped the plastic finish and primed it and then painted it as a base coat before the hydrodip