036 Pea shooter muffler

[blsnelling]

It may be a tad rich, but it sounded fine once you finally put a little load on it in the last vid. You really need to put more load on your saws when tuning them especially.

 

[Wonkydonkey]

Matt, I did a cut or two today, on my 036, 18" bar and 18-ish tho of the key which equates to 5* adv, before it was to rich, it would only make 12-12.5k unloaded.

But today I got 14k at the end of the cut unloaded. After I turned the H in 16 to 8th of a turn.
I,m not sure which I prefer.
I'll add the vid

 

[MattG]

It may be a tad rich, but it sounded fine once you finally put a little load on it in the last vid.

Yeah, I thought so. But I reckon I quite like it right there.

You really need to put more load on your saws when tuning them especially.

Yeah, I know what you are saying Brad. Often I'm constrained by what test wood I've got and how well I can secure it. Most of this year's sawing wood is already ringed quite thin.

I'm saving the biggish birch bough I've got under the conifer, for the hybrid, for when the HD-16 arrives and I put that on

 

[MattG]

Matt, I did a cut or two today, on my 036, 18" bar and 18-ish tho of the key which equates to 5* adv, before it was to rich, it would only make 12-12.5k unloaded.

But today I got 14k at the end of the cut unloaded. After I turned the H in 16 to 8th of a turn.
I,m not sure which I prefer.
I'll add the vid

That sounded really nice Sean! These saws are little beauties!