036 Pea shooter muffler

[MattG]

Guys,

Can anyone recommend the stihl PN of an 036 or 360 muffler, which doesn't have this pi$$y little tube outlet, like the one that my 036 came with:


(with an almighty 8mm spanner for comparison)

I'm wanting to change it for a muffler with the classic deflector shield, since the outlets are easier to enlarge for that design. e.g. like this style:



From looking at the IPL for the 036, I can't actually seeing the pea shooter muffler there:



I looked at the IPL for the ms360 - it looked identical! Anyway what you guys reckon, is

(part 13) 1125 140 0611 a normal design i.e. not with the thin outlet tube?

 

[VinceGU05]

Guys,

Can anyone recommend the stihl PN of an 036 or 360 muffler, which doesn't have this pi$$y little tube outlet, like the one that my 036 came with:

View attachment 91240
(with an almighty 8mm spanner for comparison)

I'm wanting to change it for a muffler with the classic deflector shield, since the outlets are easier to enlarge for that design. e.g. like this style:

View attachment 91241

From looking at the IPL for the 036, I can't actually seeing the pea shooter muffler there:

View attachment 91242

I looked at the IPL for the ms360 - it looked identical! Anyway what you guys reckon, is

(part 13) 1125 140 0611 a normal design i.e. not with the thin outlet tube?

the media cat says that the 360 muffler can be used on the 036. but why the pea shooter i dont know. looking at both saws on the mediacat didnt show it.

 

[drf256]

Jusr weld a deflector on the flywheel side and call it a day.

There are AM 036 muffs available, but there's a baffle to remove and the fitment isn't perfect.

Yours kinda looks brazed on.

 

[MattG]

Jusr weld a deflector on the flywheel side and call it a day.

There are AM 036 muffs available, but there's a baffle to remove and the fitment isn't perfect.

Yours kinda looks brazed on.

I forgot to say - I can't weld!

I've just seen this on ebay:



listed as



so I should I be good to go, with 1124 140 0611 PN.

 

[MattG]

Do any of you US guys have the peashooter style outlet too on the 036? I see my brit buddy @Wonkydonkey has the same thing on this #98 .

 

[Backtroller]

The picture quality is poor, but it looks kind of rough.

I have never seen a "pea shooter" from the factory here.

 

[Cracker Boy]

Ive never seen one either id buy a used oem muffler for 20 bucks on fleabay and make the port bigfer.last one i had i put a deflector on like doc says.you can use some 1/2 little self tapping phillips head screws from ace

 

[rattler]

 

[Cracker Boy]

View attachment 91502

That looks like you just opened factory port hole bigger thats what i did on my personal saw. The last one i put a deflector on other side startrd to melt my brake flag.

 

[rattler]

It is just opened up a little.

 

[MattG]

View attachment 91502

Thanks Rattler,

When I get around to working on my 036, I'll just buy a more normal muffler like that one, and open it out. What ever were stihl thinking with the peashooter for us guys on the right side of the pond ?!?!

 

[Cracker Boy]

It is just opened up a little.

Loud as hell them 036s too when opened up its louder then my dual ported 044

 

[Wonkydonkey]

@MattG ive just seen this thread, in my hutlz buy a wk ago. amongst other stuff ive ordered a am 036/360 muff. to do/try just what your doing. as i wanted to keep the muff thats on it already

 

[Wonkydonkey]

sorry there upside down, but you get the idea, of the pea shooter, ? anhow i got a farmatec exhaust now as i wanted to keep this exhaust intact

 

[MattG]

Well I'm hoping to buy 1124 140 0611 (stihl PN) someday. Should be like the one in @rattler s above post.

The peashooter design just seems too restrictive to me.....but only time will tell

 

[Wonkydonkey]

here ya go MattG, std pea shooter exhaust and std timing 18' bar in some beech

and a farmatec needed a spacer fashioned to make it fit. also i advanced the timing 15thou you can see it got more power/torque

and yeh my slacky chain, Doh.

 

[MattG]

here ya go MattG, std pea shooter exhaust and std timing 18' bar in some beech

and a farmatec needed a spacer fashioned to make it fit. also i advanced the timing 15thou you can see it got more power/torque

and yeh my slacky chain, Doh.

Sounds nice. I couldn't quite make out the muffler - has the Farmertec one not got the peashooter pipe then?

 

[Wonkydonkey]

no the first is the pea shoooter vid that it had when i got it 5yrs ago.
and the second vid is the farmatec (like what rattler posted) with the timing advance of 15 thou. i wanted to do a before and after vid.
it breaths more without the pee-shooter cos after fitting the farmatec i had to adjust the LA cos the chain was going round.

 

[MattG]

no the first is the pea shoooter vid that it had when i got it 5yrs ago.
and the second vid is the farmatec (like what rattler posted) with the timing advance of 15 thou. i wanted to do a before and after vid.
it breaths more without the pee-shooter cos after fitting the farmatec i had to adjust the LA cos the chain was going round.

Good sh!t man....

 

[Wonkydonkey]

here you can see the difference in depth, bloody f-tec. to me ages making a spacer