Backtroller
Here For The Long Haul!
- Local time
- 10:23 AM
- User ID
- 349
- Joined
- Dec 31, 2015
- Messages
- 2,791
- Reaction score
- 11,312
- Location
- Land of Badgers
I finished my muffler mod today and recently did some surgery on a nylon later model 026 airfilter.
I copied (to the best of my limited ability) what Al does on his 026/260 builds. I dremeled out the nylon and created a few more holes and glued some 150 micron stainless steel mesh. I'll see how it works I also used one of @Red97 medium deflectors. I grinded the welds the best I could because I want it to look as "factory" as possible with a big deflector sticking out. I was able to weld some stainless 1/8" mesh inside and put a piece in the stock location.
I copied (to the best of my limited ability) what Al does on his 026/260 builds. I dremeled out the nylon and created a few more holes and glued some 150 micron stainless steel mesh. I'll see how it works I also used one of @Red97 medium deflectors. I grinded the welds the best I could because I want it to look as "factory" as possible with a big deflector sticking out. I was able to weld some stainless 1/8" mesh inside and put a piece in the stock location.